Frequently Asked Questions about lsof ********************************************************************** | The latest release of lsof is always available via anonymous ftp | | from lsof.itap.purdue.edu. Look in pub/lsof.README for its | | location. | ********************************************************************** ______________________________________________________________________ This file contains frequently asked questions about lsof and answers to them. Vic Abell November 7, 2007 ______________________________________________________________________ Table of Contents: 1.0 General Concepts 1.1 Lsof -- what is it? 1.2 Where do I get lsof? 1.2.1 Are there mirror sites? 1.2.2 Are lsof executables available? 1.2.3 How do I check the validity of an lsof distribution? 1.2.4 Why can't I get the sum(1) result reported in README.lsof_? 1.2.5 Why won't gpg accept the lsof-signing PGP public key? 1.3 Where can I get more lsof documentation? 1.4 How do I report an lsof bug? 1.5 Where can I get the lsof FAQ? 1.5.1 How timely is the on-line FAQ? 1.6 Is there a test suite? 1.7 Is lsof vulnerable to the standard I/O descriptor attack? 1.8 Can I alter lsof's make(1) behavior? 1.9 Is there an lsof license? 1.10 Language locale support 1.10.1 Does lsof support language locales? How do I use the support? 1.10.2 Does lsof support wide characters in language locales? 1.11 Are any files in the lsof distribution copyrighted? 2.0 Lsof Ports 2.1 What ports exist? 2.2 What about a new port? 2.2.1 User-contributed Ports 2.3 Why isn't there an AT&T SVR4 port? 2.4 Why isn't there an SGI IRIX port? 3.0 Lsof Problems 3.1 Configuration Problems 3.1.1 Why can't Configure determine the UNIX dialect version? 3.2 Compilation Problems 3.2.1 Why does the compiler complain about missing header files? 3.2.2 Why does gcc complain about the contents of header files distributed by the system's vendor? 3.2.3 Other header file problems 3.3 Why doesn't lsof report full path names? 3.3.1 Why do lsof -r reports show different path names? 3.3.2 Why does lsof report the wrong path names? 3.3.3 Why doesn't lsof report path names for unlinked (rm'd) files? 3.3.4 Why doesn't lsof report the "correct" hard linked file path name? 3.3.5 When will lsof report path names for deleted files? 3.4 Why is lsof so slow? 3.5 Why doesn't lsof's setgid or setuid permission work? 3.6 Does lsof have security problems? 3.7 Will lsof show remote hosts using files via NFS? 3.8 Why doesn't lsof report locks held on NFS files? 3.8.1 Why does lsof report a one byte lock on byte zero as a full file lock? 3.9 Why does lsof report different values for open files on the same file system (the automounter phenomenon)? 3.10 Why don't lsof and netstat output match? 3.10.1 Why can't lsof find accesses to some TCP and UDP ports? 3.11 Why does lsof update the device cache file? 3.12 Why doesn't lsof report state for UDP socket files? 3.13 I am editing a file with vi; why doesn't lsof find the file? 3.14 Why doesn't lsof report TCP/TPI window and queue sizes for my dialect? 3.14.1 Why doesn't lsof report socket options, socket states, and TCP flags and values for my dialect? 3.14.2 Why doesn't lsof report the partial listen queue connection count for my dialect? 3.15 What does "no more information" in the NAME column mean? 3.16 Why doesn't lsof find a process that ps finds? 3.17 Why doesn't -V report a search failure? 3.18 Portmap problems 3.18.1 Why isn't a name displayed for the portmap registration? 3.18.2 How can I display only portmap registrations? 3.18.3 Why doesn't lsof report portmap registrations for some ports? 3.19 Why is `lsof | wc` bigger than my system's open file limit? 3.20 Why doesn't lsof report file offset (position)? 3.20.1 What does lsof report for size when the file doesn't really have one? 3.21 Problems with path name arguments 3.21.1 How do I ask lsof to search a file system? 3.21.2 Why doesn't lsof find all the open files in a file system? 3.21.3 Why does the lsof exit code report it didn't find open files when some files were listed? 3.21.4 Why won't lsof find all the open files in a directory? 3.21.5 Why are the +D and +d options so slow? 3.21.6 Why do the +D and +d options produce warning messages? 3.22 Why can't my C compiler find the rpcent structure definition? 3.23 Why doesn't lsof report fully on file "foo" on UNIX dialect "bar?" 3.24 Why do I get a complaint when I execute lsof that some library file can't be found? 3.25 Why does lsof complain it can't open files? 3.26 Why does lsof warn "compiled for x ... y; this is z."? 3.27 How can I disable the kernel identity check? 3.28 Why don't ps(1) and lsof agree on the owner of a process? 3.29 Why doesn't lsof find an open socket file whose connection state is past CLOSE_WAIT? 3.30 Why don't machine.h definitions work when the surrounding comments are removed? 3.31 What do "can't read inpcb at 0x...", "no protocol control block", "no PCB, CANTSENDMORE, CANTRCVMORE", etc. mean? 3.32 What do the "unknown file system type" warnings mean? 3.33 Installation 3.33.1 How do I install lsof? 3.33.2 How do I install a common lsof when I have machines that need differently constructed lsof binaries? 3.34 Why do lsof 4.53 and above reject device cache files built by earlier lsof revisions? 3.35 What do "like block special" and "like character special" mean in the NAME column? 3.36 Why does an lsof make fail because of undefined symbols? 3.37 Command Regular Expressions (REs) 3.37.1 What are basic and extended regular expressions? 3.37.2 Why can't I put a slash in a command regular expression? 3.37.3 Why does lsof say my command regular expression wasn't found? 3.38 Why doesn't lsof report on shared memory segments? 3.39 Why does lsof report two instances of itself? 3.40 Why does lsof report '\n' in device cache file error messages? 3.41 Kernel Symbol and Address Problems 3.41.1 What does "lsof: WARNING: name cache hash size length error: 0" mean? 3.41.2 Why does lsof produce "garbage" output? 3.42 Why does lsof report open files when run as super user that it doesn't report when run with lesser privileges? 3.43 Test Suite Problems 3.43.1 Errors all tests can report: 3.43.1.1 Why do tests complain "ERROR!!! can't execute ../lsof"? 3.43.1.2 Why do tests complain "ERROR!!! can't find ..." a file? 3.43.1.3 Why do some tests fail to compile? 3.43.1.4 Why do some tests always fail? 3.43.1.5 Why does the test suite say it hasn't been validated on my dialect? 3.43.1.6 Why do the tests complain they can't stat() or open() /dev/mem or /dev/kmem? 3.43.2 LTbigf test issues 3.43.2.1 Why does the LTbigf test say that the dialect doesn't support large files? 3.43.2.2 Why does LTbigf complain about operations on its config.LTbigf* file? 3.43.2.3 Why does LTbigf warn that lsof doesn't return file offsets? 3.43.3 Why does the LTbasic test complain "ERROR!!! lsof this ..." and "ERROR!!! lsof that ..."? 3.43.4 LTnfs test issues 3.43.4.1 Why does the LTnfs test complain "couldn't find NFS file ..."? 3.43.5 LTnlink test issues 3.43.5.1 Why does the LTnlink test complain that its test file is on an NFS file system? 3.43.5.2 Why does LTnlink delay and report "waiting for link count update: ..."? 3.43.6 LTdnlc test issues 3.43.6.1 Why won't the LTdnlc test run? 3.43.6.2 What does the LTdnlc test mean by "... found: 100.00%"? 3.43.6.3 Why does the DNLC test fail? 3.43.7 Why hasn't the test suite been qualified for 64 bit HP-UX 11 when lsof is compiled with gcc? 3.43.8 LTszoff test issues 3.43.8.1 Why does LTszoff warn that lsof doesn't return file offsets? 3.43.9 LTlock test issues 3.44 File descriptor list (the ``-d'' option) problems 3.44.1 Why does lsof reject a ``-d'' FD list? 3.44.2 Why are file descriptors other than those in my FD list reported? 3.45 How can I supply device numbers for inaccessible NFS file systems? 3.46 Why won't lsof find open files on over-mounted file systems? 3.47 What can be done when lsof reports no more space? 3.48 What if the lsof build encounters ar and ld problems? 4.0 AIX Problems 4.1 What is the Stale Segment ID bug and why is -X needed? 4.1.1 Stale Segment ID APAR 4.2 Gcc Work-around for AIX 4.1x 4.3 Gcc and AIX 4.2 4.4 Why won't lsof's Configure allow the use of gcc for AIX below 4.1? 4.5 What is an AIX SMT file type? 4.6 Why does AIX lsof start so slowly? 4.7 Why does exec complain it can't find libc.a[shr.o]? 4.8 What does lsof mean when it says, "TCP no PCB, CANTSENDMORE, CANTRCVMORE" in a socket file's NAME column? 4.9 When the -X option is used on AIX 4.3.3, why does lsof disable it, saying "WARNING: user struct mismatch; -X option disabled?" 4.10 Why doesn't the -X option work on my AIX 5L or 5.[123] system? 4.11 Why doesn't /usr/bin/oslevel report the correct AIX version? 4.11.1 Why doesn't /usr/bin/oslevel report the correct AIX version on AIX 5.1? 4.12 Why does lsof for AIX 5.1 or above Power architecture complain about kernel bit size? 4.13 What can't gcc be used to compile lsof on the ia64 architecture for AIX 5 and above? 4.14 Why does lsof get a segmentation fault when compiled with gcc for a 64 bit Power architecture AIX 5.1 kernel? 4.15 Why does lsof ignore AFS on my AIX system? 4.16 Why does lsof report "system paging space is low" and exit? 4.17 Why does lsof have compilation and execution problems on AIX 5.3 above maintenance level 1? 5.0 Apple Darwin Problems 5.1 What do /dev/kmem-based and libproc-based mean? 5.2 /dev/kmem-based Apple Darwin Questions 5.2.1 Why does Configure ask for a path to the Darwin XNU kernel header files? 5.2.1.1 Why does Configure complain that Darwin XNU kernel header files are missing? 5.2.2 Why doesn't Apple Darwin lsof report text file information? 5.2.3 Why doesn't Apple Darwin lsof support IPv6? 5.2.4 Why does lsof complain about a mismatch between the release for which lsof was compiled and the booted Mac OS X release? 5.2.5 Why does lsof for Apple Darwin 8 and higher report "stat(...): ..." in the NAME column? 5.2.6 What are the limitations of Apple Darwin lsof link count reporting? 5.3 Libproc-based Apple Darwin Questions 6.0 BSD/OS BSDI Problems 6.0.5 Statement of deprecation 7.0 DEC OSF/1, Digital UNIX, and Tru64 UNIX Problems 7.1 Why does lsof complain about non-existent /dev/fd entries? 7.2 Why does the Digital UNIX V3.2 ld complain about Ots* symbols? 7.3 Why can't lsof locate named pipes (FIFOs) under V3.2? 7.4 Why does lsof use the wrong configuration header files? For example, why can't the lsof compilation find cpus.h? 7.5 Why does lsof indicate incomplete paths with " -- " for Tru64 UNIX 5.1 files? 7.6 Why doesn't lsof report link count, node number, and size for some Tru64 5.x CFS files? 7.7 Why does lsof say it can't read the kernel name list or proc table on Digital UNIX 4.x or Tru64 UNIX? 8.0 FreeBSD Problems 8.1 Why doesn't lsof report on open kernfs files? 8.2 Why doesn't lsof work on my FreeBSD system? 8.3 Why doesn't lsof work on the RELEASE version of CURRENT? 8.4 Why can't kvm_open() can't find some file? 9.0 HP-UX Problems 9.1 What do /dev/kmem-based and PSTAT-based mean? 9.2 /dev/kmem-based HP-UX lsof Questions 9.2.1 Why doesn't a /dev/kmem-based HP-UX lsof compilation use -O? 9.2.2 Why doesn't the /dev/kmem-based CCITT support work under 10.x? 9.2.3 Why can't /dev/kmem-based lsof be compiled with `cc -Aa` or `gcc -ansi` under HP-UX 10.x? 9.2.4 Why does /dev/kmem-based lsof complain about no C compiler? 9.2.5 Why does Configure complain about q4 for /dev/kmem-based lsof for HP-UX 11? 9.2.6 When compiling /dev/kmem-based lsof for HP-UX 11 what do the "aCC runtime: ERROR..." messages mean? 9.2.7 Why doesn't /dev/kmem-based lsof for HP-UX 11 report VxFS file link counts, node numbers, and sizes correctly? 9.2.8 Why can't /dev/kmem-based lsof be built with gcc for 64 bit HP-UX 11? 9.2.8.1 How can I acquire a gcc for building lsof for 64 bit HP-UX 11? 9.2.9 Why does /dev/kmem-based lsof for HP-UX 11 report "unknown file system type" for VxFS files? 9.2.10 Why does the ANSI-C compiler complain about comments in HP-UX 11 header files? 9.2.11 Why does dnode1.c cause the HP-UX 11 compiler to complain that is missing or incorrect? 9.3 PSTAT-based HP-UX lsof Questions 9.3.1 Why does PSTAT-based lsof complain about pst_static and other PSTAT structures? 9.3.2 Why does PSTAT-based lsof complain it can't read pst_* structures? 9.3.3 Why does PSTAT-based lsof rebuild the device cache file after each reboot? 9.3.4 Why doesn't PSTAT-based lsof report TCP addresses for telnetd's open socket files? 9.3.5 Why does PSTAT-based lsof cause an HP-UX 11.11 kernel panic? 9.3.6 Why doesn't PSTAT-based lsof report a CWD that is on a loopback (LOFS) file system? 9.3.7 Why do some swinstall packages for PSTAT-based HP-UX 11.11 packages complain about setgid and setuid bits? 9.3.8 Why won't the bundled C compiler build PSTAT-based lsof for PA-RISC HP-UX 11.23? 9.3.9 Why won't gcc build PSTAT-based lsof for PA-RISC HP-UX 11.23? 9.4 Why won't the HP-UX depot install? 10.0 Linux Problems 10.1 What do /dev/kmem-based and /proc-based lsof mean? 10.2 /proc-based Linux lsof Questions 10.2.1 Why doesn't /proc-based lsof report file offsets (positions)? 10.2.2 Why does /proc-based lsof report "can't identify protocol" for some socket files? 10.2.3 Why does /proc-based lsof warn about unsupported formats? 10.2.4 Why does /proc-based lsof report "(deleted)" after a path name? 10.2.5 Why doesn't /proc-based lsof report full open file information for all processes? 10.2.6 Why won't Customize offer to change HASDCACHE or WARNDEVACCESS for /proc-based lsof? 10.2.7 /proc-based lsof Linux NFS questions 10.2.7.1 Why can't lsof find files on an accessible NFS file system? 10.2.7.2 Why can't lsof find files on an inaccessible NFS file system? 10.2.8 Why doesn't /proc-based Linux lsof report socket options and values, socket state flags, and TCP options and values? 10.2.9 Does /proc-based Linux lsof use a device cache? 10.2.10 Why doesn't /proc-based Linux lsof report any or all file structure values for its +fcfgGn option? 10.3 Special Linux file types 10.3.1 Why is ``DEL'' reported as a Linux file type? 10.3.2 Why is ``unknown'' reported as a Linux file type? 10.4 Linux ``mem'' Entry Problems 10.4.1 What do ``path dev=xxx'' and ``path inode=yyy'' mean in the NAME column of Linux ``mem'' file types? 10.4.2 Why is neither link count nor size reported for some Linux ``DEL'' and ``mem'' file types? 10.5 Special Linux NAME column messages 10.5.1 What does ``(stat: xxx)'' mean in the NAME column of Linux files? 10.5.2 What does ``(readlink: xxx)'' mean in the NAME column of Linux files? 10.6 Why is ``NOFD'' reported as a Linux file type? 10.7 Why does Linux lsof report a NAME column value that begins with ``/proc''? 10.8 Linux /proc/net/tcp* and /proc/net/udp* issues 10.8.1 Why use the Linux -X option? 10.8.2 Why does lsof say ``-i is useless when -X is specified''? 10.8.3 Why does lsof say ``can't identify protocol (-X specified)''? 11.0 NetBSD Problems 11.1 Why doesn't lsof report on open kernfs files? 11.2 Why doesn't lsof report on open files on: file descriptor file systems; /proc file systems; 9660 (CD-ROM) file systems; MS-DOS (floppy disk) file systems; or kernel file systems? 11.3 Why does lsof produce confusing results for nullfs file systems? 11.4 NetBSD header file problems 11.4.1 Why can't the compiler find some NetBSD header files? 11.4.2 Why does NetBSD lsof produce incorrect output? 11.5 Why isn't lsof feature xxx enabled for NetBSD? 12.0 NEXTSTEP and OPENSTEP Problems 12.1 Why can't lsof report on 3.1 lockf() or fcntl(F_SETLK) locks? 12.2 Why doesn't lsof compile for NEXTSTEP with AFS? 13.0 OpenBSD Problems 13.1 Why doesn't lsof support kernfs on my OpenBSD system? 13.2 Will lsof work on OpenBSD on non-x86-based architectures? 13.3 problems 13.3.1 Why does the compiler claim nbpg isn't defined? 13.3.2 What value should I assign to nbpg? 13.4 Why doesn't lsof report on open MS-DOS file system (floppy disk) files? 13.5 Why isn't lsof feature xxx enabled for OpenBSD? 14.0 Output problems 14.1 Why do the lsof column sizes change? 14.2 Why does the offset have ``0t' and ``0x'' prefixes? 14.3 What are the values printed in the FILE_FLAG column and why is 0x sometimes included? 14.3.1 Why doesn't lsof display FILE_FLAG values for my dialect? 14.4 Network Addresses 14.4.1 Why does lsof's -n option cause IPv4 addresses, mapped to IPv6, to be displayed in IPv6 notation? 14.5 Why does lsof output \x, ^x, or \xnn for characters sometimes? 14.5.1 Why is space considered a non-printable character in command names? 14.6 Why doesn't lsof print all the characters of a command name? 14.7 Why does lsof reject some -c command names, saying their lengths are "> what system provides (nn)"? 14.8 Why does lsof sometimes print TYPE numbers instead of names? 15.0 Pyramid Version Problems 15.0.5 Statement of deprecation 16.0 SCO Problems 16.1 SCO OpenServer Problems 16.1.1 How can I avoid segmentation faults when compiling lsof? 16.1.2 Where is libsocket.a? 16.1.3 Why do I get "warning C4200" messages when I compile lsof? 16.2 SCO|Caldera UnixWare Problems 16.2.1 Why doesn't lsof compile on my UnixWare 7.1.1 or above system? 16.2.2 Why does lsof complain about node_self() on my UnixWare 7.1.1 or above system? 16.2.3 Why does UnixWare 7.1.1 or above complain about -lcluster, node_self(), or libcluster.so? 16.2.4 Why does UnixWare 7.1.1 or above lsof complain it can't read the kernel name list? 16.2.5 Why doesn't lsof report link count, node number, and size for some UnixWare 7.1.1 or above CFS files? 16.2.6 Why doesn't lsof report open files on all UnixWare 7.1.1 NonStop Cluster (NSC) nodes? 16.2.7 Why doesn't lsof report the UnixWare 7.1.1 NonStop Cluster (NSC) node a process is using? 16.2.8 Why does the compiler complain about missing UnixWare 2.1[.x] header files? 17.0 Sun Problems 17.0.5 Statement of deprecation 17.1 My Sun gcc-compiled lsof doesn't work -- why? 17.2 How can I make lsof compile with gcc under Solaris 2.[456], 2.5.1, 7, 8 or 9? 17.3 Why does Solaris Sun C complain about system header files? 17.4 Why doesn't lsof work under my Solaris 2.4 system? 17.5 Where are the Solaris header files? 17.6 Where is the Solaris /usr/src/uts//sys/machparam.h? 17.7 Why does Solaris lsof say ``can't read proc table''? 17.8 Why does Solaris lsof complain about a bad cached clone device? 17.9 Why doesn't Solaris make generate .o files? 17.10 Why does lsof report some Solaris 2.3 and 2.4 lock types as `N'? 17.11 Why does lsof Configure say "WARNING: no cc in ..."? 17.12 Solaris 7, 8 and 9 Problems 17.12.1 Why does lsof say the compiler isn't adequate for Solaris 7, 8 or 9? 17.12.2 Why does Solaris 7, 8 or 9 lsof say "FATAL: lsof was compiled for..."? 17.12.3 How do I build lsof for a 64 bit Solaris kernel under a 32 bit Solaris kernel? 17.12.4 How do I install lsof for Solaris 7, 8 or 9? 17.12.5 Why does my Solaris 7, 8 or 9 system say it cannot execute lsof? 17.12.6 What gcc will produce 64 bit Solaris 7, 8 and 9 executables? 17.12.7 Why does lsof on my Solaris 7, 8 or 9 system say, "can't read namelist from /dev/ksyms?" 17.13 Solaris and COMMON 17.13.1 What does COMMON mean in the NAME column for a Solaris VCHR file? 17.13.2 Why does a COMMON Solaris VCHR file sometimes seem to have an incorrect minor device number? 17.14 Why don't lsof and Solaris pfiles reports always match? 17.15 Why does lsof say, "kvm_open(namelist=default, core=default): Permission denied?" 17.16 Why is lsof slow on my busy Solaris UFS file system? 17.17 Why is lsof so slow on my Solaris 8 or 9 system? 17.18 Solaris and VxFS 17.18.1 Why doesn't lsof support VxFS 3.4 on Solaris 2.6, and above? 17.18.2 Why does lsof report "vx_inode: vxfsu_get_ioffsets error" for open Solaris 2.6 and above VxFS 3.4 and above files? 17.18.3 Why does Solaris Configure claim there is no VxFS library? 17.18.4 Why doesn't Solaris lsof report VxFS path name components? 17.18.5 Why does Solaris 10 lsof report scrambled VxFS paths? 17.19 Large file problems 17.19.1 Why does lsof complain it can't stat(2) a Solaris 2.5.1 large file? 17.20 Why does lsof get a segmentation fault on 64 bit Solaris 8 using NIS+? 17.21 Will lsof crash the Solaris kernel? 17.22 Why does lsof on Solaris 7, 8, or 9 report a kvm_open() failure? 17.23 Solaris and SAM-FS 17.23.1 Why does Solaris lsof report "(limited SAM-FS info)"? 17.23.2 Why can't lsof locate named SAM-FS files? 17.24 Lsof and Solaris 10 zones 17.24.1 How can I make lsof list the Solaris zone? 17.24.2 Why doesn't lsof work in a Solaris 10 zone? 17.24.3 Why does lsof complain it can't stat() Solaris 10 zone file systems? 17.25 Solaris 10 problems 17.25.1 Why does Solaris 10 lsof sometimes report the wrong path name? 17.25.2 Why does Solaris 10 lsof sometimes report only the mounted-on directory and device? 17.25.3 What does "(deleted)" mean in the NAME column of a Solaris 10 open file? 17.25.4 What does "(?)" mean in the NAME column of a Solaris 10 open file? 17.26 Solaris contract file problems 17.26.1 Why doesn't lsof report size, link count and node number for Solaris 10 contract files? 17.26.2 Why can't lsof locate a Solaris 10 contract file by path name? 17.27 Solaris 10 ZFS probblems 17.27.1 Why does Configure ask for the location of ZFS header files? 17.27.2 Why do -h and -v output warn about possibly inaccurate ZFS structure definitions? 17.27.3 Why don't the Open Solaris ZFS header files provide correct ZFS kernel structure definitions? 18.0 Lsof Features 18.1 Why doesn't lsof doesn't report on /proc entries on my system? 18.2 How do I disable the device cache file feature or alter it's behavior? 18.2.1 What's the risk with a perverted device cache file? 18.2.2 How do I put the full host name in a personal device cache file path? 18.2.3 How do I put the personal device cache file in /tmp? 18.3 Why doesn't lsof know about AFS files on my favorite dialect? 18.3.1 Why doesn't lsof report node numbers for all AFS volume files, or how do I reveal dynamic module addresses to lsof? ______________________________________________________________________ 1.0 General Concepts 1.1 Lsof -- what is it? Lsof is a UNIX-specific tool. Its name stands for LiSt Open Files, and it does just that. It lists information about files that are open by the processes running on a UNIX system. See the lsof man page, the 00DIST file, the 00QUICKSTART file, and the 00README file of the lsof distribution for more information. 1.2 Where do I get lsof? Lsof is available via anonymous ftp from lsof.itap.purdue.edu. Look in the pub/tools/unix/lsof sub-directory. ftp://lsof.itap.purdue.edu/pub/tools/unix/lsof Bzip2'd, compressed and gzip'd tar files with GPG certificates are available. 1.2.1 Are there mirror sites? On September 3, 2003 these sites appeared to mirror lsof: ftp://ftp.cerias.purdue.edu/pub/tools/unix/sysutils/lsof ftp://ftp.tau.ac.il/pub/unix/admin ftp://ftp.cert.dfn.de/pub/tools/admin/lsof ftp://ftp.fu-berlin.de/pub/unix/tools/lsof ftp://ftp.kaizo.org/pub/lsof/ ftp://ftp.tu-darmstadt.de/pub/sysadmin/lsof ftp://ftp.tux.org/pub/sites/vic.cc.purdue.edu/tools/unix/lsof ftp://gd.tuwien.ac.at/utils/admin-tools/lsof ftp://sunsite.ualberta.ca/pub/Mirror/lsof ftp://the.wiretapped.net/pub/security/host-security/lsof/ 1.2.2 Are lsof executables available? Some lsof executables are available in the subdirectory tree pub/tools/unix/lsof/binaries These are neither guaranteed to be current nor cover every dialect and machine architecture. I don't recommend you use pre-compiled lsof binaries; I recommend you obtain the sources and build your own binary. Even if you're a Sun user without a Sun C compiler, you can use gcc to compile lsof. If you must use a binary file, please be conscious of the security and configuration implications in using an executable of unknown or different origin. The lsof binaries are accompanied by GPG certificates. Please use them! Three additional cautions apply to executables: 1. Don't try to use an lsof executable, compiled for one version of a UNIX dialect, on another. Patches can make the dialect version different. 2. If you want to use an lsof binary on multiple systems, they must be running the same dialect OS version and have the same patches and feature support. 1.2.3 How do I check the validity of an lsof distribution? There are two ways to check the validity of an lsof distribution: 1. Follow the instructions in the CHECKSUMS_ file found with the lsof distribution. Checking with GPG is the best method. 2. Follow the instructions in the "Security" section of the README.lsof_ file found inside the lsof distribution. Again, checking with GPG is the best method. 1.2.4 Why can't I get the sum(1) result reported in README.lsof_? The "Security" section of the README.lsof_ file found inside the lsof distribution gives md5, sum, and GPG certificate information. The simplest, the sum(1) signature, seems to be the trickiest. That's because there are different sum(1) methods, BSD systems usually have cksum(1) instead of sum(1), and different systems compute the block size value differently. First, the lsof sum results are computed with the old, "alternate" algorithm. On newer systems, you can use sum's "-r" option to get that computation result. Second, on BSD systems you usually must use cksum(1) instead of sum(1), because they have no sum(1). To tell cksum(1) to use the old, "alternate" algorithm, use its "-o1" option. Third, the second value that sum reports, the block count, may be computed differently on different systems -- usually block size is considered to be 512 or 1,024. The lsof block counts were computed on a system with a sum(1) option that considers block size to be 512. The BSD system cksum(1) -o1 option considers block size to be 1,024. If your sum(1) or cksum(1) doesn't report a block count that matches the sum(1) signature given in README.lsof_, check its man page to see what block size it uses, then adjust its reported block count appropriately. 1.2.5 Why won't gpg accept the lsof-signing PGP public key? An older PGP key that once signed lsof distributions is included in lsof revisions prior to 4.70. The PGP key is indeed my key, but is incompatible with GPG. It was created about ten years ago and is still acceptable to PGP versions 2.6.2 through 6.5.2. Lsof revisions 4.70 and above are signed with a copy of my PGP key that has been made acceptable for use with GPG by importing it under GPG's "--allow-non-selfsigned-uid" option. You can find my GPG compatible key in lsof revisions 4.70 and above and at: ftp://lsof.itap.purdue.edu/pub/Victor_A_Abell.gpg If you have an older lsof revision with my PGP key, there are two possible ways to use it: * Use it with a PGP version from 2.6.2 through 6.5.2. * Use GPG's "--allow-non-selfsigned-uid" option when you import my PGP key into your GPG key ring. $ gpg --allow-non-selfsigned-uid --import Victor_A_Abell.pgp 1.3 Where can I get more lsof documentation? A significant set of documentation may be found in the lsof distribution (See "Where can I get lsof?). There is a manual page, copious documentation in files whose names begin with 00, and a copy of this FAQ in the file 00FAQ (perhaps slightly less recent than this file if you're reading it via a web browser.) Two URLs provide some documentation that appears in the lsof distribution: FAQ: ftp://lsof.itap.purdue.edu/pub/tools/unix/lsof/FAQ man page: ftp://lsof.itap.purdue.edu/pub/tools/unix/lsof/lsof_man 1.4 How do I report an lsof bug? If you believe you have discovered a bug in lsof, you can report it via e-mail to . Do NOT report lsof bugs to the UNIX dialect vendor. Make sure "lsof" appears in the "Subject:" line so my e-mail filter won't classify your letter as Spam. Before you send me a bug report, please read the "Bug Reports" section of the 00README file of the lsof distribution. It lists the steps you should take before and when reporting a suspected bug. 1.5 Where can I get the lsof FAQ? This lsof FAQ is available in the file 00FAQ in the lsof distribution and at the URL: ftp://lsof.itap.purdue.edu/pub/tools/unix/lsof/FAQ 1.5.1 How timely is the on-line FAQ? The on-line FAQ is sometimes too timely. :-) I update it as soon as new information is available. That may include information about support that won't appear in the lsof source distribution until the next revision. If you encounter something like that, please send me e-mail at . I may be able to point you at a pre-release distribution that contains the support of interest. Make sure "lsof" appears in the "Subject:" line so my e-mail filter won't classify your letter as Spam. 1.6 Is there a test suite? Yes, as of lsof revision 4.63 there's an automated lsof test suite in the tests/ sub-directory of the lsof top-level directory. More information on using the test suite, what it does, how to use it and how to configure it may be found in the 00TEST file of the lsof distribution. That file also explains where the test suite has been tested. Frequently asked questions about the test suite will be asked and answered here in the FAQ. (See "Test Suite Problems.") After lsof has been configured with the Configure script, lsof can be made and tested with: $ make $ cd tests $ make Under normal conditions -- i.e., unless the lsof tree has been cleaned or purged severely -- all tests or individual tests may be run by: $ cd test $ make or $ (See 00TEST.) 1.7 Is lsof vulnerable to the standard I/O descriptor attack? Lsof revisions 4.63 and above are not vulnerable. Lsof revisions 4.62 and below are vulnerable, but no damage scenarios have so far been demonstrated. The standard I/O descriptor attack is a local programmed assault on setuid and setgid programs that tricks them into opening a sensitive file with write access on a standard descriptor, usually stderr (2), and writing error messages to stderr. If the attacker can control the content of the error message, the attacker may gain elevated privileges. The attack was first described in Pine Internet Advisory PINE-CERT-20020401, available at: http://www.pine.nl/advisories/pine-cert-20020401.txt If you are using an lsof revision below 4.63, you should remove any setuid or setgid permissions you might have given its executable. Then you should upgrade to lsof revision 4.63. 1.8 Can I alter lsof's make(1) behavior? Yes. There are at least two ways to do that. You can put replacements for lsof Makefile strings in your environment. If you specify the -e make option, make will give environment variable values precedence over strings from the Makefile. For example, to change the compiler string CC from the environment, you might do this with the Bourne shell: $ CC=foobar; export CC $ make -e You can also replace lsof Makefile strings in the make command invocation. Here's the previous example done that way: $ make CC=foobar Changing the CFGF, CFGL, and DEBUG strings used in lsof Makefiles, either from the environment or from the make invocation, can significantly alter lsof make(1) behavior. I commonly use DEBUG to change the -O option to -g so I can build an lsof executable for debugging -- e.g., $ make DEBUG=-g (Look for DEBUG in this FAQ for other examples of its use.) Consult the Makefiles to see what CFGL, CFGL, and other lsof Makefile strings contain, and to see what influence their alteration might have on lsof make(1) behavior. 1.9 Is there an lsof license? No. The only restriction on the use or redistribution of lsof is contained in this copyright statement, found in every lsof source file. (The copyright year in or format of the notice may vary slightly.) /* * Copyright 2002 Purdue Research Foundation, West Lafayette, * Indiana 47907. All rights reserved. * * Written by Victor A. Abell * * This software is not subject to any license of the American * Telephone and Telegraph Company or the Regents of the * University of California. * * Permission is granted to anyone to use this software for * any purpose on any computer system, and to alter it and * redistribute it freely, subject to the following * restrictions: * * 1. Neither the authors nor Purdue University are responsible * for any consequences of the use of this software. * * 2. The origin of this software must not be misrepresented, * either by explicit claim or by omission. Credit to the * authors and Purdue University must appear in documentation * and sources. * * 3. Altered versions must be plainly marked as such, and must * not be misrepresented as being the original software. * * 4. This notice may not be removed or altered. */ 1.10 Language locale support 1.10.1 Does lsof support language locales? How do I use the support? Most UNIX dialect versions of lsof support 8 bit language locale characters -- e.g., the ability to print 8 bit characters that have accents and other marks over them. See the answer to the "Does lsof support wide characters in language locales?" question for information on when lsof's language locale support covers characters wider than 8 bits. To see if lsof supports language locales for your dialect, look in the dialect's machine.h header file for the HASSETLOCALE definition. If it is present and not disabled, then lsof has language locale support for the dialect. To enable lsof's language locale support, you must specify in a locale environment variable (e.g., LANG) a language locale known to your system that supports the printing of marked characters -- e.g, en_US. (On some dialects locale(1) may be used to list the known language locales.) Note that LANG=C and LANG=POSIX are NOT language locales that support the printing of marked characters. If the language locale doesn't support the printing of marked characters, lsof's OUTPUT of them follows the rules for non-printable characters described in the OUTPUT section of lsof(8). Consult your dialect's setlocale(3) man page for the names of environment variables other than LANG -- e.g., LC_ALL, LC_TYPE, etc. -- which may be used to define language locales. 1.10.2 Does lsof support wide characters in language locales? When lsof's language locale support is enabled with the HASSETLOCALE definition, for selected dialects lsof will also print wide characters (e.g., from UTF-8) when iswprint(3) reports them to be printable. Wide character support is available when HASWIDECHAR is defined in a dialect's machine.h header file. As of this writing on July 22, 2004, the following dialect versions have wide character support: AIX >= 4.3.2 Apple Darwin >= 7.3.0 FreeBSD >= 5.2 HP-UX >= 11.00 /proc-based Linux NetBSD >= 1.6 SCO OpenServer >= 5.0.6 Solaris >= 2.6 Tru64 UNIX 5.1 1.11 Are any files in the lsof distribution copyrighted? Yes. Most files carry the copyright of the Purdue Research Foundation and may be redistributed under the terms that accompany the copyright notice. Those terms may also be found in the answer to the question, "Is there an lsof license?") A few files carry other copyright notices. Some are BSD notices and they explain the terms under which they are included in the lsof distrbution. Those that carry vendor copyright notices have been reproduced in their original or modified forms with permission from the copyright owners. That permission is indicated in the README files that accompany the files. 2.0 Lsof Ports 2.1 What ports exist? The pub/lsof.README file carries the latest port information: AIX 5.[23] and 5.3-ML1 Apple Darwin 7.x and 8.x for Power Macintosh systems FreeBSD 4.9 for x86-based systems FreeBSD 7.0 and 8.0 for AMD64-based systems Linux 2.1.72 and above for x86-based systems NetBSD 1.[456], 2.x and 3.x for Alpha, x86, and SPARC-based systems NEXTSTEP 3.[13] SCO OpenServer Release 5.0.4 for x86-based systems Solaris 9 and 10 In the above list the only UNIX dialects present are ones for which I could test the current lsof revision. Lsof may still support unlisted dialect versions -- e.g., HP-UX 10.20, Solris 7, etc. -- but I don't have access to systems where I could test lsof on them, so I can't claim lsof works on them. If your dialect isn't in the list, you should try building lsof on it anyway. Lsof version 4 predecessors, versions 2 and 3, may support older version of some dialects. Contact me via e-mail if you're interested in their distributions. Make sure "lsof" appears in the "Subject:" line so my e-mail filter won't classify your letter as Spam. 2.2 What about a new port? The 00PORTING file in the distribution gives hints on doing a port. I will consider doing a port in exchange for permanent access to a test host. I require permanent access so I can test new lsof revisions, because I will not offer distributions of dialect ports I cannot upgrade and test. 2.2.1 User-contributed Ports Sometimes I receive contributions of ports of lsof to systems where I can't test future revisions of lsof. Hence, I don't incorporate these contributions into my lsof distribution. However, I do make descriptions of these contributions available. You can find them in the 00INDEX and README files at: ftp://lsof.itap.purdue.edu/pub/tools/unix/lsof/contrib Consult the 00INDEX file in the contrib/ directory for a list of the available contributions and consult README there for information on how to obtain them. 2.3 Why isn't there an AT&T SVR4 port? I haven't produced an AT&T SVR4 port because I haven't seen a UNIX dialect that is strictly limited to the AT&T System V, Release 4 source code. Every one I have seen is a derivative with vendor additions. The vendor additions are significant to lsof because they affect the internal kernel structures with which lsof does business. While some vendor derivatives of SVR4 are similar, each one I have encounted so far has been different enough from its siblings to require special source code. If you're interested in an SVR4 version of lsof, here are some existing ports you might consider: DC/OSx (This obsolete port is only available upon special request.) Reliant UNIX (This obsolete port is only available upon special request.) SCO|Caldera UnixWare (This is the most likely choice.) Solaris 2.4 Why isn't there an SGI IRIX port? Lsof support for IRIX was terminated at lsof revision 4.36, because it had become increasingly difficult for me to obtain information on the IRIX kernel structures lsof needs to access. At IRIX 6.5 I decided the obstacles were too large for me to overcome, and I stopped supporting lsof on IRIX. I have sources to the last revision of lsof (4.36) for IRIX, but that version of lsof does not work on IRIX 6.5 and is vulnerable to the standard I/O descriptor attack. (See the "Is lsof vulnerable to the standard I/O descriptor attack?" Q&A for more information.) Contact me to discuss obtaining those sources. If you wish to pursue the issue, don't contact me, contact SGI. This case was opened with SGI on the subject: Case ID: 0982584 Category: Unix Priority: 30-Moderate Impact Problem Summary: kernel structure header files needed for continued lsof support Problem Description: Email In 07/17/98 19:09:23 3.0 Lsof Problems 3.1 Configuration Problems 3.1.1 Why can't Configure determine the UNIX dialect version? The lsof Configure script uses UNIX shell commands, often in a command pipeline, to determine the UNIX dialect version. (Consult the dialect stanza in Configure to determine which commands are used.) If Configure can't determine the dialect version, probably one of the commands is not behaving as Configure expects. Symptoms of the failure include Configure warning messages and incorrect version definitions in the Makefile CFLAGS. If you suspect that the lsof Configure script is failing to determine the dialect version correctly, try running the commands from Configure stanza one at a time. That will usually reveal the source of the problem. Be particularly mindful that the PATH environment variable can cause commands to be executed from non-standard directories. If you can't determine the source of the problem, there is a work-around. You can supply the UNIX dialect version in the LSOF_VSTR environment variable. Use Configure as a guide to forming what it expects in LSOF_VSTR. There is also some information on LSOF_VSTR in the 00XCONFIG documentation file of the lsof distribution. 3.2 Compilation Problems 3.2.1 Why does the compiler complain about missing header files? When you use make to build lsof, the compiler may complain that it can't find header files -- e.g., $ make (cd lib; make DEBUG="-O" CFGF="-DAIXA=0 -DAIXV=4330 \ -DLSOF_VSTR=\"4.3.3.0\"") gcc -DAIXA=0 -DAIXV=4330 -DLSOF_VSTR="4.3.3.0" -O \ -c ckkv.c In file included from ckkv.c:33: ../machine.h:70: \ sys/types.h: A file or directory in the path name \ does not exist. \ That type of complaint doesn't represent an lsof problem. It represents a problem with a missing system header file that probably should be found in /usr/include or in the system source tree. As a first step try using find(1) to locate the problem header file. If it's a system header file and can't be found, here are some possible causes: 1. The file set, RPM or package containing the header files has not been installed. instructions for doing that are specific to the UNIX dialect and beyond the scope of this document. 2. If the compiler is gcc, the private gcc header files: * May not have been installed; * May have been installed incorrectly; * May not have been updated properly after the last compiler or system update; * Ones from a previous installation may not have been removed. A path leading to the gcc private header files can be found with `gcc -v`. Consult the gcc documentation for instructions on proper installation of the private gcc header files. 3. On some dialects -- e.g., FreeBSD, NetBSD, OpenBSD -- lsof may need to use header files that are located in the system source tree -- /sys or /usr/src/sys, for example. Make sure the system source tree has been installed. 3.2.2 Why does gcc complain about the contents of header files distributed by the system's vendor? When you use make to build lsof and gcc to compile it, gcc may complain that it finds errors in system header files -- e.g., $ make (cd lib; make DEBUG="-O" CFGF="-Dsolaris=80000 \ -DHASPR_GWINDOWS -m64 -DHASIPv6 -DHAS_VSOCK \ -DLSOF_VSTR=\"5.8\"") gcc -Dsolaris=80000 -DHASPR_GWINDOWS -m64 -DHASIPv6 \ -DHAS_VSOCK -DLSOF_VSTR="5.8" -O -c dvch.c In file included from /usr/include/sys/proc.h:31, \ from /homes/abe/gnu/gcc-3.2.1/lib/gcc-lib/sparcv9-sun-solaris2/ \ 3.2.1/include/sys/user.h:267, from /usr/include/kvm.h:13, \ from ../dlsof.h:53, from ../lsof.h:172, from dvch.c:43: \ /homes/abe/gnu/gcc-3.2.1/lib/gcc-lib/sparcv9-sun-solaris2/\ 3.2.1/include/sys/task.h:59: parse error before "uint_t" Errors like the above are most likely not problems in the system's header files, but in the private copies of them that were created when gcc was made or installed. Note the presense of ".../gcc-3.2.1/lib/gcc-lib/sparcv9-sun-solaris2/3.2.1/include/..." in the paths for user.h and task.h. It indicates both header files are gcc-specific. To solve errors like this requires comparing the header files in the vendor's /usr/include tree to the gcc-specific ones in gcc's private gcc-lib/.../include tree. It may be necessary to regenerate gcc-specific header files, correct them or remove them. See the gcc distribution for the appropriate tools. A possible temporary work-around is to direct gcc to use the vendor's header files instead of its temporary ones by declaring -I/usr/include in the compilation flags. 3.2.3 Other header file problems Don't overlook any vendor tools that might validate the vendor header files installed on the system -- e.g., the Solaris pkgchk tool can be used to check the header files that were installed from the SUNWhea package. For other header file problems contact me at . Please follow the reporting guidelines in the "How do I report an lsof bug?" section of this FAQ. 3.3 Why doesn't lsof report full path names? Lsof reports the full path name when it is specified as a search argument for open files that match the argument. However, if the argument is a file system mounted-on directory, and lsof finds additional path name components from the kernel name cache, it will report them. Lsof reports path name for file system types that have path name lookup features -- e.g., some versions of AdvFS for Digital and Tru64 UNIX. The Linux /proc-based lsof reports full path names, because the Linux /proc file system provides them. Lsof on recent builds of Solaris 10 also report full path names, because those Solaris kernels record the full path name in the vnode structure. Otherwise, lsof uses the kernel name cache, where it exists and can be accessed, and reports some or all path name components (e.g., the sys and proc.h components of /usr/include/sys/proc.h) for these dialects: Apple Darwin DC/OSx FreeBSD HP-UX, /dev/kmem and PSTAT based Linux, /dev/kmem-based NetBSD NEXTSTEP OpenBSD OPENSTEP Reliant UNIX SCO OpenServer SCO|Caldera UnixWare Solaris 2.x, 7, 8 and 9 (except for some VxFS versions; see the "Why doesn't Solaris lsof report VxFS path name components?" section for more information) Solaris 10 (early builds) Tru64 UNIX As far as I can determine, AFS path lookups don't share in kernel name cache operations, so lsof can't identify open AFS path name components. Apparently Solaris VxFS versions 4 and above don't share in kernel name cache operations, either, so lsof can't display path name components for those open files. Since the size of the kernel name cache is limited and the cache is in constant flux, it does not always contain the names of all components in an open file's path; sometimes it contains none of them. Lsof reports the file system directory name and whatever components of the file's path it finds in the cache, starting with the last component and working backwards through the directories that contain it. If lsof finds no path components, lsof reports the file system device name instead. When lsof does report some path components in the NAME column, it prefixes them with the file system directory name, followed by " -- ", followed by the components -- e.g., /usr -- sys/path.h for /usr/include/sys/path.h. The " -- " is omitted when lsof finds all the path name components of a file's name. The PSTAT-based HP-UX lsof relies on kernel name cache contents, too, even though its information comes to lsof via pstat() function calls. Consequently, PSTAT-based HP-UX lsof won't always report full paths, but may use the " -- " partial path name notation, or may occasionally report no path name at all but just the file system mounted-on directory and device names. Lsof can't obtain path name components from the kernel name caches of the following dialects: AIX Only the Linux kernel records full path names in the structures it maintains about open files; instead, most kernels convert path names to device and node number doublets and use them for subsequent file references once files have been opened. To convert the device and node number doublet into a complete path name, lsof would have to start at the root node (root directory) of the file system on which the node resides, and search every branch for the node, building possible path names along the way. That would be a time consuming operation and require access to the raw disk device (usually implying setuid-root permission). If the prospect of all that local disk activity doesn't concern you, think about the cost when the device is NFS-mounted. Try using the file system mount point and node number lsof reports as parameters to find -- e.g., $ find -inum -print and you may get an appreciation of what a file system directory tree search would cost. 3.3.1 Why do lsof -r reports show different path names? When you run lsof with its repeat (``-r'') option, you may notice that the extent to which it reports path names for the same files may vary from cycle to cycle. That happens because other processes are making kernel calls affecting the cache and causing entries to be removed from and added to it. 3.3.2 Why does lsof report the wrong path names? Under some circumstances lsof may report an incorrect path name component, especially for files in a rapidly changing directory like /tmp. In a rapidly changing directory, like /tmp, if the kernel doesn't clear the cache entry when it removes a file, a new file may be given the same keys and lead lsof to believe that the old cache entry with the same keys belongs to the new file. Lsof tries to avoid this error by purging duplicate entries from its copy of the kernel name cache when they have the same device and inode number, but different names. This error is less likely to occur in UNIX dialects where the keys to the name cache are node address and possibly a capability ID. The Apple Darwin, Digital UNIX, FreeBSD, HP-UX, NEXTSTEP, OPENSTEP, Solaris, Tru64 UNIX, and UnixWare dialects use node address. Apple Darwin, FreeBSD, NetBSD, OpenBSD, Tru64 UNIX, and also use a capability ID to further identify name cache entries. 3.3.3 Why doesn't lsof report path names for unlinked (rm'd) files? When lsof gets path name components from the kernel's name cache, it does not report the path names of a file that has been unlinked from its parent directory -- e.g., deleted via rm, or the unlink() system call -- even when some process may still hold the file open; lsof reports only the file system's mounted-on directory and device. That's because path name components are removed from the kernel name cache when the file is unlinked. Unlinked open files are sometimes used by applications for temporary, but invisible storage (i.e., ls won't show them, and no other process can open them.) However, they may occasionally consume disk space to excess and cause concern for a system administrator, who will be unable to locate them with find, ls, du, or other tools that rely on finding files by examining the directory tree. By using lsof's +L option you can see the link count of open files -- in the NLINK column. An unlinked file will have an NLINK value of zero. By using the option +L1 you can tell lsof to display only files whose link count is less than one (i.e., zero). There are some UNIX dialect-specific exceptions to lsof's inability to report unlinked path names. They are described in the answer to the "When will lsof report path names for deleted files?" question. 3.3.4 Why doesn't lsof report the "correct" hard linked file path name? When lsof reports a rightmost path name component for a file with hard links, the component may come from the kernel's name cache. Since the key which connects an open file to the kernel name cache may be the same for each differently named hard link, lsof may report only one name for all open hard-linked files. Sometimes that will be "correct" in the eye of the beholder; sometimes it will not. Remember, the file identification keys significant to the kernel are the device and node numbers, and they're the same for all the hard linked names. 3.3.5 When will lsof report path names for deleted files? Lsof will report path names for deleted files for two dialects: Linux and later builds of Solaris 10. Deleted Linux path names are reported by default and have "(deleted)" at their ends. The display of Solaris 10 deleted path names may be selected with the -X option. When selected they are also reported with "(deleted)" at their ends. 3.4 Why is lsof so slow? Lsof may appear to be slow if network address to host name resolution is slow. This can happen, for example, when the name server is unreachable, or when a Solaris PPP cache daemon is malfunctioning. To see if name lookup is causing lsof to be slow, turn it off with the ``-n'' option. Port service name lookup or portmap registration lookup may also be causes of slow-down. To suppress port service name lookup, specify the ``-P'' option. Lsof doesn't usually make direct portmap calls -- only when +M is specified, or when HASPMAPENABLED is defined during lsof construction. (The lsof help panel, produced with `lsof -h` will display the default portmap registration reporting state.) The quickest first step in checking if lsof is slow because of the portmapper is to use lsof's ``-M'' option. Lsof may be slow if UID to login name lookups are slow. Suppress them with ``-l''. On dialects where lsof uses the kernel name cache, try disabling its use with ``-C''. (You can tell if lsof uses the kernel name cache by looking for ``-C'' in lsof's ``-h'' output.) Of course, disabling kernel name cache use will mean that lsof won't report full or partial path names, just file system and character device names. Older AIX lsof may be slow to start because of its oslevel identity comparison. (Newer AIX lsof uses uname(2).) See the "Why does AIX lsof start so slowly?" and "Why does lsof warn "compiled for x ... y; this is z.?" sections for more information. 3.5 Why doesn't lsof's setgid or setuid permission work? If you install lsof on an NFS file system that has been mounted with the nosuid option, lsof may not be able to use the setgid or setuid permission you give it, complaining it can't open the kernel memory device -- e.g., /dev/kmem. The only solution is to install lsof on a file system that doesn't inhibit setgid or setuid permission. 3.6 Does lsof have security problems? I don't think so. However, lsof does usually start with setgid permission, and sometimes with setuid-root permission. Any program that has setgid or setuid-root permission, should always be regarded with suspicion. Lsof drops setgid power, holding it only while it opens access to kernel memory devices (e.g., /dev/kmem, /dev/mem, /dev/swap). That allows lsof to bypass the weaker security of access(2) in favor of the stronger checks the kernel makes when it examines the right of the lsof process to open files declared with -k and -m. Lsof also restricts some device cache file naming options when it senses the process has setuid-root power. On a few dialects lsof requires setuid-root permission during its full execution in order to access files in the /proc file system. These dialects include: DC/OSx 1.1 for Pyramid systems Reliant UNIX 5.4[34] for Pyramid systems When lsof runs with setuid-root permission it severely restricts all file accesses it might be asked to make with its options. The device cache file (typically .lsof_hostname in the home directory of the real user ID that executes lsof) has 0600 modes. (The suffix, hostname, is the first component of the host's name returned by gethostname(2).) However, even when lsof runs setuid-root, it makes sure the file's ownerships are changed to that of the real user and group. In addition, lsof checks the file carefully before using it (See the question "How do I disable the device cache file feature or alter it's behavior?" for a description of the checks.); discards the file if it fails the scrutiny; complains about the condition of the file; then rebuilds the file. See the 00DCACHE file of the lsof distribution for more information about device cache file handling and the risks associated with the file. 3.7 Will lsof show remote hosts using files via NFS? No. Remember, lsof displays open files for the processes of the host on which it runs. If the host on which lsof is running is an NFS server, the remote NFS client processes that are accessing files on the server leave no process records on the server for lsof to examine. 3.8 Why doesn't lsof report locks held on NFS files? Generally lock information held by local processes on remote NFS files is not recorded by the UNIX dialect kernel. Hence, lsof can't report it. One exception is some patch levels of Solaris 2.3, and all versions of Solaris 2.4 and above. Lsof for those dialects does report on locks held by local processes on remotely mounted NFS files. 3.8.1 Why does lsof report a one byte lock on byte zero as a full file lock? When a process has a lock of length one, starting at byte zero, lsof can't distinguish it from a full file lock. That's because most UNIX dialects represent both locks the same way in their file lock (flock or eflock) structures. 3.9 Why does lsof report different values for open files on the same file system (the automounter phenomenon)? On UNIX dialects where file systems may be mounted by an automounter with the ``direct'' type, lsof may sometimes report difference DEVICE, SIZE/OFF, INODE and NAME values when asked to report files open on the file system. This happens because some files open on the file system -- e.g., the current directory of a shell that changed its directory to the file system as the file system's first reference -- may be characterized in the kernel with temporary automounter node information. The cd doesn't cause the file system to be mounted. A subsequent reference to the file system -- e.g., an ls of any place in it -- will cause the file system to be mounted. Processes with files open to the mounted file system are characterized in the kernel with data that reflects the mounted file system's parameters. Unfortunately some kernels (e.g., some versions of Solaris 2.x) don't revisit the process that did only a change-directory for the purpose of updating the data associated with the open directory file. The file continues to be characterized with temporary automounter information until it does another directory change, even a trivial ``cd .''. Lsof will report on both reference types, when supplied the file system name as an argument, but the data lsof reports will reflect what it finds in the kernel. For the different types lsof will display different data, including different major and minor device numbers in the DEVICE column, different lengths in the SIZE/OFF column, different node numbers in the INODE column, and slightly different file system names in the NAME column. In contrast, fuser, where available, can only report on one reference type when supplied the file system name as an argument. Usually it will report on the one that is associated with the mounted file system information. If the only reference type is the temporary automounter one, fuser will often be silent about it. 3.10 Why don't lsof and netstat output match? Lsof and netstat output don't match because lsof reports the network information it finds in open file system objects -- e.g., socket files -- while netstat often gets its information from separate kernel tables. The information available to netstat may describe network activities never or no longer associated with open files, but necessary for proper network state machine operation. For example, a TCP connection in the FIN_WAIT_[12] state may no longer have an associated open file, because the connection has been closed at the application layer and is now being closed at the TCP/IP protocol layer. 3.10.1 Why can't lsof find accesses to some TCP and UDP ports? Lsof stands for LiSt Open Files. If there is no open file connected to a TCP or UDP port, lsof won't find it. That's the most common reason why lsof doesn't find a port netstat might report open. One reason I've found on some UNIX dialects is that their kernels set aside TCP and UDP ports for communicating with support activities, running in application layer servers -- the automounter daemons, and the NFS biod and nfsd daemons are examples. Netstat may report the ports are in use, but lsof doesn't. Another reason is that netstat may also be able to report a port is open on a particular dialect, because it uses a source of data different from what lsof uses -- e.g., netstat might examine kernel tables or use streams messages to MIB2, while lsof relies on the information it finds in open file structures and their descendants. Sometimes it's possible to search the data netstat and lsof use. For example, on Linux /proc/tcp and /proc/udp can be examined. There might an entry there for a particular protocol and port, but if the line on which the port appears doesn't have an inode number that matches an inode number of an open file, lsof won't be able to identify the process using the port. This is a tough question to which there is no easy answer. 3.11 Why does lsof update the device cache file? At the end of the lsof output you may see the message: lsof: WARNING: /Homes/abe/.lsof_vic was updated. In this message /Homes/abe/.lsof_vic is the path to the private device cache file for login abe. (See 00DCACHE.) Lsof issues this message when it finds it necessary to recheck the system device directory (e.g., /dev or /devices) and rebuild the device cache file during the open file scan. Lsof may need to do these things it finds that a device directory node has changed, or if it cannot find a device in the cache. 3.12 Why doesn't lsof report state for UDP socket files? Lsof reports UDP TPI connection state -- TS_IDLE (Idle), TS_BOUND (Bound), etc. -- for some, but not all dialects. TPI state is stream-based TCP/IP information that isn't available in many dialects. A fairly weak general rule is if netstat(1) reports UDP TPI state, lsof may be able to report it, too. But don't be surprised if lsof fails to report UDP TPI state for your dialect. Other factors influence lsof's ability to report UDP TPI state, including the availability of state number data in kernel structures, and state number to state name conversion data. 3.13 I am editing a file with vi; why doesn't lsof find the file? Classic implementations of vi usually don't keep open the file being edited. (Newer ones may do so in order to maintain an advisory lock.) Instead classic vi opens the file, makes a temporary copy (usually in /tmp or /usr/tmp), and does its work in that file. When you save the file being edited from a classic vi implementation, it reopens and rewrites the file. During a classic vi session, except for the brief periods when vi is reading or rewriting the file, lsof won't find an open reference to the file from the vi process, because there is none. 3.14 Why doesn't lsof report TCP/TPI window and queue sizes for my dialect? Lsof only reports TCP/TPI window sizes for Solaris, because only its netstat reports them. The intent of providing TCP/TPI information in lsof NAME column output is to make it easier to match netstat output to lsof output. In general lsof only reports queue sizes for both TCP and UDP (TPI) connections on BSD-derived UNIX dialects, where both sets of values appear in kernel socket queue structures. SYSV-derived UNIX dialects whose TCP/IP implementations are based on streams generally provide only TCP queue sizes, not UDP (TPI) ones. While you may find that netstat on some SYSV-derived UNIX dialects with streams TCP/IP may report UDP (TPI) queue sizes, you will probably also find that the sizes are always zero -- netstat supplies a constant zero for UDP (TPI) queue sizes to make its headers align the same for TCP and UDP (TPI) connections. Solaris seems to get it right -- i.e., its netstat does not report UDP (TPI) queue sizes. When in doubt, I chose to avoid reporting UDP (TPI) queue sizes for UNIX dialects whose netstat-reported values I knew to be a constant zero or whose origin I couldn't determine. OSR is a dialect in this category. 3.14.1 Why doesn't lsof report socket options, socket states, and TCP flags and values for my dialect? The lsof -T argument, 'f', that selects the reporting of socket options, socket states and TCP flags was implemented at lsof revision 4.71 for the following UNIX dialects, providing the indicated information: AIX 4.3.2 and 5.1 and above All socket options and values, socket states, and TCP flags and values described in lsof(8) are reported. Apple Darwin 7.2 and above All socket options and values, socket states, and TCP flags and values described in lsof(8) are reported. Digital UNIX and Tru64 UNIX 4.0 All socket options and values, socket states, and TCP flags and values described in lsof(8) are reported. FreeBSD 4.9 and above All socket options and values, socket states, and TCP flags and values described in lsof(8) are reported. HP-UX 11.00 (/dev/kmem-based lsof) All socket options and values are reported. No socket states are reported. Only the TF_NODELAY TCP flag and the TF_MSS value are reported. HP-UX 11.11 and iiiv2 (PSTAT-based lsof) All socket options and values, and socket states are reported. No TCP flags or values are reported. Linux No socket options and values, socket states, or TCP flags and values are reported. The support for "-Tf" could not be added to Linux, because socket options, socket states, and TCP flags and values are not available via the /proc file system. NetBSD 1.6G and above All socket options and values, socket states, and TCP flags and values described in lsof(8) are reported. OpenBSD 3.4 and above All socket options and values, socket states, and TCP flags and values described in lsof(8) are reported. OPENSTEP 4.2 All socket options and values, socket states, and TCP flags and values described in lsof(8) are reported. OpenUNIX 8 All socket options and values, socket states, and TCP flags and values described in lsof(8) are reported. SCO OpenServer Release 5.0.6 All socket options and values, socket states, and TCP flags and values described in lsof(8) are reported. Solaris 2.6, 8 and above The socket option display is limited to BROADCAST, DEBUG, DGRAM_ERRIND, DONTROUTE and OOBINLINE. Socket values are limited to KEEPALIVE and LINGER. No socket states are reported. The TCP DELACK, NODELAY and SENTFIN flags are reported. The TCP MSS value is reported. UnixWare 7.1.[134] All socket options and values, socket states, and TCP flags and values described in lsof(8) are reported. 3.14.2 Why doesn't lsof report the partial listen queue connection count for my dialect? The reporting of partial listen queue connections was added to -Tf processing at lsof revision 4.76. Currently it is reported for these dialects: AIX 4.3.2 This dialect is no longer supported, so no attempt was made to add partial listen queue length support for it. AIX 5.1 and above Partial listen queue information is available. Apple Darwin 7.2 and above Partial listen queue information is available. Digital UNIX 4.0 This dialect is no longer supported, so no attempt was made to add partial listen queue length support for it. FreeBSD 4.9 and above Partial listen queue information is available. HP-UX 11.00 (/dev/kmem-based lsof) No partial listen queue information is available. HP-UX 11.11 and iiiv2 (PSTAT-based lsof) No partial listen queue information is available. Linux No partial listen queue information is available. NetBSD 1.6G and above Partial listen queue information is available. OpenBSD 3.4 and above Partial listen queue information is available. OPENSTEP 4.2 Partial listen queue information is available. OpenUNIX 8 This dialect is no longer supported, so no attempt was made to add partial listen queue length support for it. SCO OpenServer Release 5.0.6 No partial listen queue information is available. Solaris 2.6, 8 and above Partial listen queue information is available. Tru64 UNIX 5.0 This dialect is no longer supported, so no attempt was made to add partial listen queue length support for it. Tru64 UNIX 5.1 Partial listen queue information is available. UnixWare 7.1.[134] Partial listen queue information is available. 3.15 What does "no more information" in the NAME column mean? When lsof can find no successor structures -- a gnode, inode, socket, or vnode -- connected to the file structure of an open descriptor of a process, it reports "no more information" in the NAME column. The TYPE, DEVICE, SIZE/OFF, and INODE columns will be blank. Because the file structure is supposed to contain a pointer to the next structure of a file's processing support, if the pointer is NUL, lsof can go no further. Some UNIX dialects have file structures for system processes -- e.g., the sched process -- that have no successor structure pointers. The "no more information" NAME will commonly appear for these processes in lsof output. It may also be the case that lsof has read the file structure while it is being assembled and before a successor structure pointer value has been set. The "no more information" NAME will again result. Unless lsof output is filled with "no more information" NAME column messages, the appearance of a few should be no cause for alarm. 3.16 Why doesn't lsof find a process that ps finds? If lsof fails to display open files for a process that ps indicates exists, there may be several reasons for the difference. The process may be a "zombie" for which ps displays the "(defunct)" state. In that case, the process has exited and has no open file information lsof can display. It does still have a process structure, sufficient for the needs of ps. Another possible explanation is that kernel tables and structures may have been changing when lsof looked for the process, making lsof unable to find all relevant process structures. Try repeating the lsof request. 3.17 Why doesn't -V report a search failure? The usual reason that -V won't report a search failure is that lsof located the search item, but was prevented from listing it by an option that doesn't participate in search failure reporting. For example, this lsof invocation: $ lsof -V -i TCP@foobar -a -d 999 won't report it can't find the Internet address TCP@foobar, even if there is an open file connected to that address, unless the open file also has a file descriptor number of 999 (the ``-a -d 999'' options). Compile-time options can also affect -V results in much the same way. For example, if HASSECURITY and HASNOSOCKSECURITY are defined at compile time, this lsof invocation, run by a non-root user: $ lsof -V -c inetd won't report that it can't find the inetd command, even if there is a process running the inetd command, because the HASSECURITY and HASNOSOCKSECURITY options prevent the listing of all but the socket files of another user, and no socket file selector (e.g., "-i") was specified. 3.18 Portmap problems 3.18.1 Why isn't a name displayed for the portmap registration? When portmap registration reporting is enabled, any time there is a registration for a local TCP or UDP port, lsof displays it in square brackets, following the port number or service name -- e.g., ``:1234[name]'' or ``:name[100083]''. The TCP or UDP port number or service number (what follows the `:') is displayed under the control of the lsof -P option. The registration identity is held by the portmapper and may be a name or a number, depending on how the registration's owner declared it. Lsof reports what the port map holds and cannot derive a registration name from a registration number. Lsof can be compiled with registration reporting enabled or disabled by default, under the control of the HASPMAPENABLED #define (usually in machine.h). The lsof help panel (`lsof -h`) will show the default. Lsof is distributed with reporting disabled by default. 3.18.2 How can I display only portmap registrations? Lsof doesn't have an option that will display only TCP or UDP ports with portmap registrations. The +M option only enables the reporting of registration information when Internet socket files are displayed; +M doesn't select the displaying of Internet socket files -- the -i option does that. This simple lsof pipe to grep will do the job: $ lsof -i +M | grep "\[" This works because -i selects Internet socket files, +M enables portmap registration reporting, and only output lines with opening square brackets will have registrations. When portmap registration reporting is enabled by default, because the lsof builder constructed it that way, +M is not necessary. (The lsof help panel, produced with `lsof -h` will display the default portmapper registration reporting state.) However, specifying +M when reporting is already enabled is acceptable, as is specifying -M when reporting is already disabled. Digression: lsof will accept `+' or `-' as a prefix to most options. (That isn't documented in the man page or help panel to reduce confusion and complexity.) The -i option is as acceptable as +i, so the above example could be written a little more tersely as: $ lsof +Mi | grep "\[" But be careful to use the ``Mi'' ordering, since ``iM'' implies M is an address argument to `i'. 3.18.3 Why doesn't lsof report portmap registrations for some ports? Lsof reports portmap registrations for local TCP and UDP ports only. It identifies local ports this way: * The port appears in the local address section of the kernel structure that contains it. * The port appears in the foreign address section of a kernel structure whose local and foreign Internet addresses are the same. * The port appears in the foreign address section of a kernel address structure whose Internet address is INADDR_LOOPBACK (127.0.0.1). Following these rules, lsof ignores foreign portmapped ports. That's done for reasons of efficiency and possible security prohibitions. Contacting all remote portmappers could take a long time and be blocked by network difficulties (i.e., be inefficient). Many firewalls block portmapper access for security reasons. Lsof may occasionally ignore portmap registration information for a legitimate local port by virtue of its local port rules. This can happen when a port appears in the foreign part of its kernel structure and the local and foreign Internet addresses don't match (perhaps because they're on different interfaces), and the foreign Internet address isn't INADDR_LOOPBACK (127.0.0.1). 3.19 Why is `lsof | wc` bigger than my system's open file limit? There is a strong temptation to count open files by piping lsof output to wc. If your purpose is to compare the number you get to some Unix system parameter that defines the number of open files your system can have, resist the temptation. One reason is that lsof reports a number of "files" that don't occupy Unix file table space -- current working directories, root directories, jail directories, text files, library files, memory mapped files are some. Another reason is that lsof can report a file shared by more than one process that itself occupies only one file table slot. If you want to know the number of open files that occupy file table slots, use the +ff option and process the lsof output's FILE_ADDR column information with standard Unix tools like cut, grep, sed, and sort. You might also consider using use lsof's field output with +ff, selecting the file struct address with -FF, and processing the output with an AWK or Perl script. See the list_fields.awk, list_fields.perl, and shared.perl5 scripts in the scripts/ subdirectory of the lsof distribution for hints on file struct post-processing filters. 3.20 Why doesn't lsof report file offset (position)? Lsof won't report a file offset (position) value if the -s option has been specified, or if the dialect doesn't support the displaying of file offset (position). That lsof is reporting only file size is indicated by the fact that the appropriate column header says SIZE instead of SIZE/OFF. If lsof doesn't support the displaying of file offset (position) -- e.g., for Linux /proc-based lsof -- the -h or -? output panel won't list the -o option. Sometimes the availability of file offset information depends on the dialect's kernel. This is particularly true for socket file offsets. Maintenance of offsets for pseudo-terminal devices varies by UNIX dialect and is related to how the dialect kernel implements pseudo-terminal support. Kernels like AIX, for example, that short-circuit the transfer of data between socket and pseudo devices to reduce TCP/IP daemon interrupt rates won't advance offsets in the TCP/IP daemon socket files. Instead they will advance offsets in the open standard I/O files of the shell child precess where the pseudo-terminal devices are used. When in doubt about the behavior of lsof in reporting file offset information, do some carefully measured experiments, consult the lsof sources, or contact me at to discuss the matter. Please follow the reporting guidelines in the "How do I report an lsof bug?" section of this FAQ. 3.20.1 What does lsof report for size when the file doesn't really have one? When a file has no true size -- e.g., it's a socket, a FIFO, or a pipe -- lsof tries to report the information it finds in the kernel that describes the contents of associated kernel buffers. Thus, for example, size for most TCP/IP files is socket buffer size. The size of the socket read buffer is reported for read-only files; the size of the write buffer for write-only files; and the sum of the buffers sizes for read-write files. 3.21 Problems with path name arguments 3.21.1 How do I ask lsof to search a file system? You can ask lsof to search for all open files on a file system by specifying its mounted path name as an lsof argument -- e.g., $ lsof / Output of the mount command will show file system mounted path names. It will also show the mounted-on device path for the file system. If the mounted-on device is a block device (the permission field in output of `ls -l ` starts with a `b/), you can specify it's name, too -- e.g., $ lsof /dev/sd0a If the mounted-on device isn't a block device -- for example, some UNIX dialects call a CD-ROM device a character device (ls output starts with a `c') -- you can force lsof to assume that the specified device names a file system with the +f option -- e.g., $ lsof +f -- /dev/sd0a (Note: you must use ``--'' after +f or -f if a file name follows immediately, because +f and -f can be followed by characters that specify flag output selections.) When you use +f and lsof can't match the device to a file system, lsof will issue a complaint. The +f option may be used in some dialects to ask lsof to search for an NFS file system by its server name and server mount point. If the mount application reports an NFS file system mounted-on value that way, then this sample lsof request should work. $ lsof +f -- fleet:/home/fleet/u5 Finally, you can use -f if you don't want a mounted file system path name to be considered a request to report all open files on the file system. This is useful when you want to know if anyone is using the file system's mounted path name. This example directs lsof to report on open access to the `/' directory, including when it's being used as a current working or root directory. $ lsof -f -- / The lsof -f option performs the same function as -f does in some fuser implementations. However, since the lsof -c option was chosen for another purpose before the `f' option was added to lsof, +f was selected as the analogue to the fuser -c option. (Sorry for the potential confusion.) 3.21.2 Why doesn't lsof find all the open files in a file system? Lsof may not find all the open files in a file system for several reasons. First, some processes with files open on the file system may have been changing status when lsof examined the process table, and lsof "missed" them. Remember, the kernel changes much faster than lsof can respond to the changes. Second, be sure you have specified the file system correctly. Perhaps you specified a file instead. You can use lsof's -V option to have lsof report in detail on what it couldn't find. Make sure the report for the file system you specified says "file system." Here's some -V output: $ /lsof -V /tmp ./lsof.h ./lsof COMMAND PID USER FD TYPE DEVICE SIZE/OFF INODE NAME lsof 2688 abe txt VREG 18,1,7 1428583 226641 ./lsof lsof 2689 abe txt VREG 18,1,7 1428583 226641 ./lsof lsof: no file use located: ./lsof.h You can also use lsof's +f option to force it to consider a path name as a file system. If lsof can't find a file system by the specified name, it will issue a complaint -- e.g., $ lsof +f -- /usr lsof: not a file system: /usr (/usr is a directory in the / file system.) 3.21.3 Why does the lsof exit code report it didn't find open files when some files were listed? Sometimes lsof will list some open files, yet return a non-zero exit code, suggesting it hasn't found all the specified files. The first thing you should when you suspect lsof is incorrect is to repeat the request, adding the -V option. In the resulting report you may find that your file system specification really wasn't a file system specification, just a file specification. Finally, if you specify two files or two file systems twice, lsof will credit all matches to the first of the two and believe that there were no matches for the second. It's possible to specify a single file system twice with different path names by using both its mounted directory path name and mounted-one device name. $ lsof +f -V spcuna:/sysprog /sysprog COMMAND PID USER FD TYPE DEVICE SIZE/OFF INODE NAME ksh 11092 abe cwd VDIR 39,0,1 1536 226562 /sysprog (spcuna:/sysprog) ... lsof: no file system use located: spcuna:/sysprog All matches were credited to /sysprog; none to spcuna:/sysprog. 3.21.4 Why won't lsof find all the open files in a directory? When you give lsof a simple directory path name argument (not a file system mounted-on name), you are asking it to search for processes that have the directory open as a file, or as a process-specific directory -- e.g., root or current working directory. If you want to list instances of open files inside the directory, you need to specify the individual path names of those files, or use the lsof +D and +d options. See the answer to the question "Why are the +D and +d options so slow?" before you use +D or +d casually. See the answer to the question "Why do the +D and +d options produce warning messages?" for an explanation of some process authority limitations of +D and +d. 3.21.5 Why are the +D and +d options so slow? The +D and +d options cause lsof to build a path name search list for a specified directory. +D causes lsof to descend the directory to its furthest subdirectory, while +d restricts it to the top level. In both cases, the specified directory itself is included in the search list. In both symbolic links are ignored. Building such a search list can take considerable time, especially when the specified directory contains many files and subdirectories -- lsof must call the system readlink() and stat() functions for each file and directory. Storing the search list can cause lsof to use more than its normal amount of dynamic memory -- each file recorded in the search list consumes dynamic memory for its path name, characteristics, and search linkages. Using the list means lsof must search it for every open file in the system. Building the search list for a directory specified on some file systems can be slow -- e.g., for an NFS directory with many files. Some file systems have special logging features that can introduce additional delays to the building of the search list -- e.g., NFS logging, or logging on a Solaris UFS file system. The bottom line is that slow search list construction may not be so much an lsof problem as a file system problem. (Hint: if you're using Solaris UFS logging, consider specifying the "logging,noatime" option pair to reduce the number of atime writes to the UFS logging queue and disk.) A somewhat risky way to speed up lsof's building of the search list is to use lsof's ``-O'' option. It forces lsof to do all system calls needed to build the search list directly, rather than in a child process. While direct system calls are much faster, they can block in the kernel -- e.g., when an NFS server stops responding -- stopping lsof until the kernel operation unblocks. As an example of the load +D can impose, consider that an `lsof +D /` on a lightly loaded NeXT '040 cube with a 1GB root file system disk took 4+ minutes of real time. It also generated several hundred error messages about files and directories the lsof process didn't have permission to access with stat(2). The bottom line is that +D and +d should be used cautiously. +D is more costly than +d for deeply nested directory trees, because of the full directory descent it causes. So use +d where possible. And you might need to consider the performance of the file system that holds the directory you name with +d or +D. In view of these warnings, when is it appropriate to use +D or +d? Probably the most appropriate time is when you would specify the directory's contents to lsof with a shell globbing construct -- e.g., `lsof *`. If that's what you need to do, `lsof +d .` is probably more efficient than having the shell produce a directory list, form it into an argument vector, and pass the vector to lsof for it to unravel. See the answer to the question "Why do the +D and +d options produce warning messages?" for an explanation of some process authority limitations of +D and +d. 3.21.6 Why do the +D and +d options produce warning messages? +D and +d option processing is limited by the authority of the lsof process -- i.e., lsof can only examine (with lstat(2) and stat(2)) files the owner of the process can access. If the ownership, group membership, or permissions of the specified directory, file within it, or directory within it prevents the owner of the lsof process from using lstat(2) or stat(2) on it, lsof will issue a warning message, naming the path and giving the system's (lstat(2's or stat(2)'s) reason (errno explanation text) for refusing access. As an example, assume user abc has a subdirectory in /tmp, owned by abc and readable, writable and searchable by only its owner. If user def asks lsof to search for all /tmp references with +D or +d, lsof will be unable to lstat(2) or stat(2) anything in abc's private subdirectory, and will issue an appropriate warning. Lsof warnings can usually be suppressed with the -w option. However, using -w with +D or +d means that there will be no indication why lsof couldn't find an open reference to a restricted directory or something contained in it. Hint: if you need to use +D or +d and avoid authority warnings, and if you have super-user power, su and use lsof with +D or +d as root. 3.22 Why can't my C compiler find the rpcent structure definition? When you try to compile lsof your compiler may complain that the rpcent structure is undefined. The complaints may look like this: >print.c: In function `fill_portmap': >print.c:213: dereferencing pointer to incomplete type >... The most likely cause is that someone has allowed a BIND installation to update /usr/include/netdb.h (or perhaps /usr/include/rpc/netdb.h), removing the rpcent structure definition that lsof expects to find there. Only Solaris has an automatic work-around. (See dlsof.h in dialects/sun.). The Solaris work-around succeeds because there is another header file, , with the rpcent structure definition, and there is a Solaris C pre-processor test that can tell when the BIND is in place and hence must be included. Doubtlessly there are similar work-arounds possible in other UNIX dialects whose header files have been "touched" by BIND, but in general I recommend restoration of the vendor's and any other header files BIND might have replaced. (I think BIND replaces , , -- and maybe others.) 3.23 Why doesn't lsof report fully on file "foo" on UNIX dialect "bar?" Lsof sometimes won't report much information on a given file, or may even report an error message in its NAME column. That's usually because the file is of a special type -- e.g., in a file system specific to the UNIX dialect -- and I haven't used a system where the file appeared during my testing. If you encounter such a situation, send me e-mail at and we may be able to devise an addition to lsof that will report on the file in question. Please follow the reporting guidelines in the "How do I report an lsof bug?" section of this FAQ. Make sure "lsof" appears in the "Subject:" line so my e-mail filter won't classify your letter as Spam. 3.24 Why do I get a complaint when I execute lsof that some library file can't be found? On systems where the LIBPATH (or the equivalent) environment variable is used to record the library search path in executable files when they are built, an incorrect value may make it impossible for the system to find the shared libraries needed to load lsof for execution. This may be particularly true on systems like AIX >= 4.1.4, where the lsof Makefile takes the precautionary step of using the -bnolibpath loader flag to insure that the path to the private static lsof library is not recorded in the lsof binary. Should LIBPATH be invalid when lsof is built, it will be recorded in the lsof binary as the default library path search order and lead to an inability to find libraries when lsof is executed. So, if you get missing library complaints when you try to execute lsof, check LIBPATH, or whatever environment variable is used on your system to define library search order in executable files. Use the tools at your disposal to look at the library paths recorded in the lsof binary -- e.g., chatr on HP-UX, dump on AIX, ldd on Solaris. Make sure, too, that when the correct library search path has been recorded in the executable file, the required library files exist at one or more of the search paths. 3.25 Why does lsof complain it can't open files? When lsof begins execution, unless it has been asked to report only help or version information, typically it will attempt to access kernel memory and symbol files -- e.g., /unix, /dev/kmem. Even though lsof needs only permission to open these files for reading, read access to them might be restricted by ownerships and permission modes. So the first step to diagnosing lsof problems with opening files is to use ls(1) to examine the ownerships and permission modes of the files that lsof wants to open. You may find that lsof needs to be installed with some type of special ownership or permission modes to enable it to open the necessary files for reading. See the "Installing Lsof" section of 00README for more information. 3.26 Why does lsof warn "compiled for x ... y; this is z."? Unless warnings are suppressed (with -w) or the kernel identity check symbol (HASKERNIDCK) definition has been deleted, all but one lsof dialect version (exception: /proc-based Linux lsof) compare the identity of the running kernel to that of the one for which lsof was constructed. If the identities don't match, lsof issues a warning like this: lsof: WARNING: compiled for Solaris release 5.7; this is 5.6. Two kernel identity differences can generate this warning -- the version number and the release number. Build and running identity differences are usually significant, because they usually indicate kernels whose structures are different -- kernel structures commonly change at dialect version releases. Since lsof reads data from the kernel in the form of structures, it is sensitive to changes in them. The general rule is that an lsof compiled for one UNIX dialect version will not work correctly when run on a different version. There are three work-arounds: 1) use -w to suppress the warning -- and risk missing other warnings; 2) permanently disable the identity check by deleting the definition of HASKERNIDCK in the dialect's machine.h header file -- with the same risk; or 3) rebuild lsof on the system where it is to be run. (Deleting HASKERNIDCK can be done with the Customize script or by editing machine.h.) Generally checking kernel identity is a quick operation for lsof. However, it is potentially slow under AIX, where lsof must run /usr/bin/oslevel. To speed up lsof, use -w to suppress the /usr/bin/oslevel test. See "Why does AIX lsof start so slowly?" for more information. 3.27 How can I disable the kernel identity check? The kernel identity check is controlled by the HASKERNIDCK definition. When it is defined, most dialects (exclusion: /proc-based Linux lsof) will compare the build-time kernel identity with the run-time one. To disable the kernel identity check, disable the HASKERNIDCK definition in the dialect's machine.h header file. The Customize script can be used to do that in its section about the kernel identity check. Caution: while disabling the kernel identity check may result in smaller lsof startup overhead, it comes with the risk of executing an lsof that may produce warning messages, error messages, incorrect output, or no output at all. 3.28 Why don't ps(1) and lsof agree on the owner of a process? Generally the user ID lsof reports in its USER column is the process effective user ID, as found in the process structure. Sometimes that may not agree with what ps(1) reports for the same process. There are sundry reasons for the difference. Sometimes ps(1) uses a different source for process information, e.g., the /proc file system or the psinfo structure. Sometimes the kernel is lax or confused (e.g., Solaris 2.5.1) about what ID to report as the effective user ID. Sometimes the system carries only one user ID in its process structure (some BSD derivatives), leaving lsof no choice. The differences between lsof and ps(1) user identifications should be small and normally it will be apparent that the confusion is over a process whose application has changed to an effective user ID different from the real one. 3.29 Why doesn't lsof find an open socket file whose connection state is past CLOSE_WAIT? TCP/IP connections in states past CLOSE_WAIT -- e.g., FIN_WAIT_1, CLOSING, LAST_ACK, FIN_WAIT_2, and TIME_WAIT -- don't always have open files associated with them. When they don't, lsof can't identify them. When the connection state advances from CLOSE_WAIT, sometimes the open file associated with the connection is deleted. 3.30 Why don't machine.h definitions work when the surrounding comments are removed? The machine.h header files in dialect subdirectories have some commented-out definitions like: /* #define HASSYSDC "/your/choice/of/path */ You can't simply remove the comments and expect the definition to work. That's intended to make you think about what value you are assigning to the symbol. The assigned value might have a system-specific convention. HASSYSDC, for example, might be /var/db/lsof.dc for FreeBSD, but it might be /var/adm/lsof.dc for Solaris. Symbols defined in the lsof documentation are described in 00PORTING, other machine.h comments, and other lsof documentation files. HASSYSDC, for example, is discussed in 00DCACHE. When comments and documentation don't suffice, consult the source code for hints on how the symbol is used. 3.31 What do "can't read inpcb at 0x...", "no protocol control block", "no PCB, CANTSENDMORE, CANTRCVMORE", etc. mean? Sometimes lsof will report "can't read inpcb at 0x00000000", "no protocol control block", "no PCB, CANTSENDMORE, CANTRCVMORE" or a similar message in the NAME column for open TCP socket files. These messages mean the file's socket structure lacks a pointer to the INternet Protocol Control Block (inpcb) where lsof expects to find connection addresses -- local and foreign ports, local and foreign IP addresses. The socket file has probably been submitted to the shutdown(2) function for processing. In some implementations lsof issues the "no PCB, CANTSENDMORE, CANTRCVMORE" message, which tries to explain the absence of a protocol control block by showing the socket state settings that have been made by the shutdown(2) function. If a non-zero address follows the "0x" in the "can't read inpcb" message, it means lsof couldn't read inpcb contents from the indicated address in kernel memory. 3.32 What do the "unknown file system type" warnings mean? Lsof may report a message similar to" unknown file system type, v_op: 0x10472f10 in the NAME column for some files. This means that lsof has encountered a vnode for the file whose operation switch address (from v_op) references a file system type for which there is no support in lsof. After lsof identifies the file system type, it uses pre-compiled code to locate the file system specific node for the file where lsof finds information like file size, device number, node number, etc. To get some idea of what the file system type might be, use nm on your kernel symbol file to locate the symbol name that corresponds to the v_op address -- e.g., on Solaris do: $ nm -x /dev/ksyms | grep 0x10472f10 0x10472f10 ... |file_system_name_vnodeops Where "file_system_name" is the clue to the unsupported file system. Lsof doesn't use the v_op address to identify file system types on all dialects. Sometimes it uses an index number it finds in the vnode. It will translate that symbol to a short name in the warning message -- e.g., "nfs3" -- if possible. 3.33 Installation 3.33.1 How do I install lsof? There is no "standard" way to install lsof. Too much depends on local conditions for me to be able to provide working install rules in the lsof make files. (The skeleton install rules you will find just give "hints.") See the "Installing Lsof" section of 00README for a fuller explanation. To install lsof you will need to consider these questions: * Who should be able to use lsof? (See HASSECURITY and HASNOSOCKSECURITY in the "Security" section of 00README.) * Where should lsof be installed? This is a decision mostly dictated by local conditions. Somewhere in /usr/local -- etc/ or sbin/ -- is a common choice. * What permissions should I give the lsof executable? The answer to this varies by dialect. The make files have install rules that give hints. The "Installing Lsof" section of 00README gives information, too. * What if I want to install lsof in a shared file system for machines that require different lsof configurations? See the next question and answer, "How do I install a common lsof when I have machines that need differently constructed lsof binaries?" 3.33.2 How do I install a common lsof when I have machines that need differently constructed lsof binaries? A dilemma that faces some system administrators when they install lsof in a shared file system -- e.g., NFS -- is that they must have different lsof executables for different systems. The answer is to build an lsof wrapper script that is executed in place of lsof. The script can use system commands to determine which lsof binary should be executed. Consider this example. You have HP-UX machines with 32 and 64 bit kernels that share the /usr/local/sbin directory where you want to install lsof. Consequently, on each system you must use a different lsof executable, built for the system's bit size. (That's because lsof reads kernel structures, sized by the kernel's bit size.) One answer is to install three things in /usr/local/sbin: 1) a 32 bit lsof as lsof32; 2) a 64 bit lsof as lsof64; and 3) an lsof script. The script might look like this one, based on work by Amir J. Katz: #!/bin/sh x=`/usr/bin/getconf KERNEL_BITS` # returns 32 or 64 if /usr/bin/test "X$x" = "X32" then lsof32 $* else if /usr/bin/test "X$x" = "X64" then lsof64 $* else echo "Can't determine which lsof executable to use;" echo "getconf KERNEL_BITS says: $x" exit 1 fi fi Solaris users should consult "How do I install lsof for Solaris 7, 8 or 9?" for information on a similar trick using the Solaris isaexec command. Users of other dialects might be able to use a command like uname(1) that can identify a distinguishing feature of the system to be incorporated in pre-installed lsof executable names. For example, use `uname -r` and install binaries with suffixes that match `uname -r` output. 3.34 Why do lsof 4.53 and above reject device cache files built by earlier lsof revisions? When lsof revisions 4.53 run and encounter a device cache file built by an earlier revision, it will reject the file and build a new one. The rejection will be advertised with these messages: lsof: WARNING: no /dev device in : 2 sections ... lsof: WARNING: created device cache file: This happens because the header line of the device cache file was changed at revision 4.53 to contain the number of the device on which the device directory resides. The old device cache file header line -- the "2 sections" line in the above warning message, node reads "2 sections, dev=600". This is not a serious problem, since lsof automatically rebuilds the device cache file with the correct header line. 3.35 What do "like block special" and "like character special" mean in the NAME column? When lsof comes across an open block or character file whose device, raw device and inode place it somewhere other than /dev (or /devices), lsof doesn't report the /dev (or /devices) name in the NAME column. Instead lsof reports the file system name and device or path name in the NAME column and parenthetically adds "like block special " or "like character special ". The value for will point to a block or character device in /dev (or /devices) whose raw device number matches that of the open file being reported, but whose device number or node number (or both) don't match. Such an open file is connected to a device node that has been created in a directory other than /dev (or /devices.) See mknod(8) for information on how such nodes are created. (Generally one needs root power to create device nodes with mknod.) 3.36 Why does an lsof make fail because of undefined symbols? When lsof is compiled via the `make` step and the final load step fails because of missing symbols, the problem may not be lsof. The problem may be that ld, called by the compiler as part of the `make` step, can't find some library that lsof needs. First check the last compiler line of the make operation -- e.g., the last line with cc or gcc in it before the undefined symbol report -- for loader arguments, i.e., ones beginning with "-l". Except for "-llsof" the rest name system libraries. ("-L./lib" precedes "-llsof" to tell the loader its location.) Check that all the named system libraries exist. Look in /lib and /usr/lib as a start, but that may not be the only place system libraries live. Consult your dialect's documentation, e.g., the compiler and loader man pages, for other possible locations. If some system library doesn't exist, that may mean it was never installed or was removed. You'll have to re-install the missing library. You may find that all the system libraries lsof uses exist. Your next step might be to use nm and grep to see if any of them contain the undefined symbols. $ nm library | grep symbol If the undefined symbol exists in some library named by the lsof make step, then you might have a problem with some environment variable that controls the load step. The most common is LD_LIBRARY_PATH. It may have a setting that causes ld to ignore a directory containing a library lsof names. If this is the case, try unsetting LD_LIBRARY_PATH in the environment of the ld process -- e.g., do: $ unset LD_LIBRARY_PATH or % unsetenv LD_LIBRARY_PATH Consult your ld man page for other environment variables that might affect library searching -- e.g., LIBPATH, LPATH, SHLIB_PATH, etc. If the undefined function doesn't exist in any libraries lsof names, check other libraries. See if the function has a man page that names its library. If the latter is true, please let me know, because that is an lsof problem I need to fix. If none of these solutions work for you, send me some documentation via e-mail at . Include `uname -a` output, the output of the lsof `Configure ...` and `make` steps, and the contents of the environment in force when the `make` step was executed -- e.g., `env` or `printenv` output. If you've located the libraries lsof names, send me that information, too. Make sure "lsof" appears in the "Subject:" line so my e-mail filter won't classify your letter as Spam. 3.37 Command Regular Expressions (REs) 3.37.1 What are basic and extended regular expressions? Lsof's ``-c'' option allows the specification of regular expressions (REs), enclosed in two slash ('/') characters and followed by these modifiers: b the RE is a basic RE. i ignore case. x the RE is an extended RE (the default). Note: the characters of the regular expression may need to be quoted to prevent their expansion by the shell. Example: this RE is an extended RE that matches exactly four characters, whose third may be an upper ('O') or lower case ('o') oh: -c /^..o.$/i For simplicity's sake, an RE that is acceptable to egrep(1) is usually called an extended RE. REs suitable for the old line editor, ed(1), are often called basic REs (and sometimes also called obsolete). These are some ways basic REs usually differ from extended REs. (There are other differences.) * `|', `+', `?', '{', and '}' are ordinary characters. * `^' is an ordinary character except at the beginning of the RE. * `$' is an ordinary character except at the end of the RE. * `*' is an ordinary character if it appears at the beginning of the RE. For more information on REs and the distinction between basic and extended REs, consult your dialect's man pages for ed(1), egrep(1), sed(1), and possibly regex(5) or regex(7). 3.37.2 Why can't I put a slash in a command regular expression? Since a UNIX command name is the last part of a path to the command's executable, the lsof command regular expression (RE) syntax uses slash ('/') to mark the beginning and end of an RE. Slash may not appear in the RE and the `\' back-slash escape is ineffective for "hiding" it. More likely than not, if you try to put a slash in an lsof command RE, you'll get this response: $ lsof -s/.\// ... lsof: invalid regexp modifier: / Lsof is complaining the the first character it found after the second slash isn't an lsof command RE modifier -- 'b', 'i', or 'x'. 3.37.3 Why does lsof say my command regular expression wasn't found? When you use both forms of lsof's -c option -- ``-c '' and ``-c /RE/[m]'' -- and ask that lsof do a verbose search (``-V''), you may be surprised that lsof will say that the regular expression wasn't found. This can happen if the ``-c '' form matches first, because then the ``-c/RE/[m]'' test will never have been applied. For example: $ ./lsof -clsof -c/^..o.$/ -V -adcwd COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME lsof 7850 abe cwd VDIR 6,0 2048 96442 / (/dev/sd0a) lsof: no command found for regex: ^..o.$ The ``-clsof'' option matched first, so the ``-c/^..o.$/ option wasn't tested. 3.38 Why doesn't lsof report on shared memory segments? Lsof reports on shared memory segments only if they're associated with an open file. That's consistent with lsof's mission -- to LiSt Open Files. Shared memory segments with no file associations aren't open files. That's not to say that a report on shared memory segments and their associated processes wouldn't be useful. But it calls for a new tool, not more baggage for lsof. 3.39 Why does lsof report two instances of itself? When you ask lsof to report all open files and it has permission to do so, you may see two lsof processes in the output. The processes are connected via pipes -- e.g., here's an HP-UX 11 example. COMMAND PID USER FD TYPE DEVICE ... ... lsof 29450 abe 7w PIPE 0x48732408 ... lsof 29450 abe 8r PIPE 0x48970808 ... ... lsof 29451 abe 6r PIPE 0x48732408 ... lsof 29451 abe 9w PIPE 0x48970808 ... The first process will usually be the lsof you initiated; the second, an lsof child process that is used to isolate its parent process from kernel functions that can block -- e.g., readlink() or stat(). Information to and from the kernel functions is exchanged via the two pipes. When the parent process detects that the child process has become blocked, it attempts to kill the child. Depending on the UNIX dialect that may succeed or fail, but the parent won't be blocked in any event. See the "BLOCKS AND TIMEOUTS" and "AVOIDING KERNEL BLOCKS" sections of the lsof man page for more information on why the child process is used and how you can specify lsof options to avoid it. (Caution: that may be risky.) 3.40 Why does lsof report '\n' in device cache file error messages? Lsof revisions prior to 4.58 may report '\n' in error messages it delivers about problems in the device cache file -- e.g., lsof: WARNING: no ...: 4 sections\n That's deliberately done to show the exact contents of the device cache file line about which lsof is complaining, including its terminating NL (New Line) '\n' character. In the above example the line in the device cache file causing the lsof complaint contains "4 sections" and ends with a '\n'. At revision 4.58 and above, device cache error messages like the one in the above example have been changed to read: lsof: WARNING: no ...: line "4 sections" The terminal '\n' is no longer reported, the line contents are enclosed in double quote marks ('"'), and the word "line" has been added as a prefix to denote that what follows is a line from the device cache file. 3.41 Kernel Symbol and Address Problems 3.41.1 What does "lsof: WARNING: name cache hash size length error: 0" mean? When run on some systems, lsof may issue this warning: lsof: WARNING: name cache hash size length error: 0 That is an example from a FreeBSD system where lsof reads the kernel's _nchash variable and finds its value is zero. Similar warnings include: WARNING: kernel name cache size: WARNING: can't read kernel's name cache: WARNING: no name cache address WARNING: name cache hash size length error: WARNING: unusable name cache size: These warnings are issued when lsof is attempting to read the kernel's name cache information. They are usually the result of a mis-match between the addresses for kernel symbols lsof gets via nlist(2) and the addresses in use by the kernel. Lsof usually gets kernel symbol addresses from what it believes to be the kernel boot file. In FreeBSD, for example, that's the path returned by getbootfile(3), usually /kernel. The boot file can have other names in other UNIX dialects -- /unix, /vmunix, /bsd, /netbsd, /mach, /stand/vmunix, etc. Lsof will get incorrect (mismatched) addresses from the boot file if it has been replaced by a newer one which hasn't yet been booted -- e.g., if this is done in FreeBSD: # mv /kernel /kernel.OLD # mv /kernel.NEW /kernel Until the FreeBSD system is rebooted, the booted kernel is /kernel.OLD, but getbootfile() says it is /kernel. If symbol addresses important to lsof in /kernel.OLD and /kernel don't match, the lsof WARNING messages result. 3.41.2 Why does lsof produce "garbage" output? Kernel name cache warnings may not be the only sign that lsof is using incorrect symbol addresses to read kernel values. If there's no reasonable test lsof can make on what it reads from the kernel, it may issue other warnings or even report nonsensical results. The warnings may appear on STDERR, such as: lsof: can't read proc table info Or the warnings may appear in the NAME column as messages saying lsof can't read or interpret some kernel structure -- e.g., ... NAME ... can't read file struct from 0x12345 One possible work-around is to point lsof's kernel symbol address gathering at the proper boot file. That can be done with lsof's -k option -- e.g., $ lsof -k /kernel.OLD The best work-around is to make sure the standard boot file is properly sited -- e.g., if you've moved a new /kernel in place, boot it. 3.42 Why does lsof report open files when run as super user that it doesn't report when run with lesser privileges? The most likely cause is that the HASSECURITY option was selected when the lsof executable was built. If HASSECURITY is defined when lsof is built, and lsof is run with the privileges of a non-ROOT user, it will only list open files belonging to the user. The same lsof executable, when run with root user privileges, will list all open files. However, if HASSECURITY and HASNOSOCKSECURITY are both defined when lsof is built, lsof will list open files belonging to the user and will also list anyone else's open socket files, provided their listing is selected with the "-i" option. So first ask yourself if the process whose open files lsof won't list belong to a user other than the one under which you're running lsof, and are not open socket files. If either is true, use lsof's help (-h or -?) option and look for a line near the bottom of the help panel that says: "... can list all files..." If the leading "..." says "Only root" then HASSECURITY was defined when lsof was built. If the trailing "..." says ", but anyone can list socket files" then HASNOSOCKSECURITY was also defined. Should you want an lsof not built with HASSECURITY defined, rerun the lsof Configure script. If you let Configure do customization, make sure you answer 'n' when it asks if you want to enable HASSECURITY and HASNOSOCKSECURITY. If you don't need to do customization, you can rebuild lsof with the "-n" option to Configure. Here's an example of such a rebuild sequence: $ Configure -clean $ Configure -n $ make More information on the HASSECURITY and HASNOSOCKSECURITY options may be found in the "Security" section of the 00README file of the lsof distribution. 3.43 Test Suite Problems 3.43.1 Errors all tests can report: 3.43.1.1 Why do tests complain "ERROR!!! can't execute ../lsof"? All tests in the test suite expect an executable lsof file to exist in the tests parent directory, ../lsof. If there's none there, the tests/Makefile has a rule to make it, but there are probably circumstances where that rule may fail. The work-around is to re-Configure and re-make lsof, then run the test suite. 3.43.1.2 Why do tests complain "ERROR!!! can't find ..." a file? Many tests create (or use from a supplied environment variable path) a test file and use lsof to find it. When lsof can't file the file, the tests report the error with messages of the form: ERROR!!! can't find ... : or ERROR!!! lsof couldn't find ... These type of error messages mean that the lsof field output delivered to the test didn't contain a file that the test could identify as the one it intended lsof to find. It might also mean that the process information -- command name, PID or parent PID -- didn't match what the test expected. This could imply a bug in the test or a bug in lsof. Try using lsof to find a known file that is open. For example, while in the tests sub-directory, do this: $ sleep 30 < Makefile $ ../lsof Makefile If lsof doesn't report that Makefile is open, then the fault may be with lsof. If lsof reports the file is open, search further in the test code for the failure cause. 3.43.1.3 Why do some tests fail to compile? If a test suite program fails to compile, it may be because I've never had an opportunity to compile the test on the particular UNIX version you are using. See Appendix B in 00TEST for a list of the UNIX dialects where the test suite has been validate. 3.43.1.4 Why do some tests always fail? There are several tests in the optional group that have conflicting or special requirements: LTbigf needs a dialect and file system that support large files. LTlock won't work if the tests/ sub-directory is on an NFS file system. LTnfs won't work if the tests/ sub-directory is not on an NFS file system. So for two tests in particular, LTlock and LTnfs, one will generally fail. Some failing tests can be run successfully by supplying to them a path to the appropriate type of file system with the -p option. 3.43.1.5 Why does the test suite say it hasn't been validated on my dialect? When you use the default rule of the test suite's Makefile, it may issue this complaint: $ cd tests $ make !!!WARNING!!! This dialect or its particular version may not have been validated with the lsof test suite. Consequently some tests may fail or may not even compile. !!!WARNING!!! You are then given the opportunity to answer 'y' to have the test suite operation continue. This message means that the tests/TestDB file in the tests sub-directory doesn't show that the test suite has been run with the combination of compiler flags found in tests/config.cflags. The tests might nor run; they may encounter compiler failures. See 00TEST for more information on the UNIX dialects where the test suite has been validated and on the workings of TestDB and its supporting scripts. When the tests/Makefile "auto" rule is used, the message is more terse and the condition is fatal. This suite has not been validated on: No opportunity to continue is offered. The tests/Makefile "silent" rule will skip checking for the validation footprint. 3.43.1.6 Why do the tests complain they can't stat() or open() /dev/mem or /dev/kmem? When the tests detect that lsof for the dialect reads its information from kernel memory (i.e., the LT_KMEM definition is present in tests/config.cflags), and when the lsof executable path is ../lsof, the tests make sure they can stat() and open() for read access the relevant kernel memory devices, /dev/kmem and possibly /dev/mem. If those stat() or open() operations fail, the tests issue an error message and quit. The message explains why the system rejected the operation in terms of system "errno" symbols and messages. More often than not the explanation will be that the process lacks permission to access the indicated device node. One work-around is to give the lsof executable being tested the necessary permission -- e.g., via chgrp, chmod, etc. -- and set its path in the LT_LSOF_PATH environment variable. (See 00TEST.) Another work-around is to make sure the process that runs the tests has the necessary permissions -- e.g., run it as root, or enable the process login to access the resources. For example, I can run the tests on my personal work-station because /dev/kmem and /dev/mem are readable by the "kmem" group and my login is in that group. 3.43.2 LTbigf test issues 3.43.2.1 Why does the LTbigf test say that the dialect doesn't support large files? Large file support is defined dialect by dialect in the lsof source files and Configure script. If large file support isn't defined there, it isn't defined in the LTbigf test. If you think that's wrong for a particular dialect, contact me via e-mail. Make sure "lsof" appears in the "Subject:" line so my e-mail filter won't classify your letter as Spam. 3.43.2.2 Why does LTbigf complain about operations on its config.LTbigf* file? The LTbigf must be able to write a large file test (size > 32 bits) and seek within it and the process file ulimit size must permit the operation. If the default location for the test file, tests/, isn't on a file system enabled for large file operations or if the process ulimit file block size is too small, lsof will get file operation errors, particularly when seeking There may be a work-around. Specify the path to a file LTbigf can write in a file system enabled for large file operations a the -poption. Make sure that the ulimit file block size permits writing a large file. For example, presuming /scratch23 is large-file-enabled, and presuming you have permission to raise the ulimit file block size, this shell commands will allow the LTbigf test to run on AIX: $ ./LTbigf -p /scratch23/abe/bigfile (Note: syntax for the ulimit command varies by dialect and by shell. Discovering the proper variant is left to the reader.) More information on this subject can be found in the LTbigf description in the 00TEST file. If course, the LTbigf.c source file in tests/ is the ultimate source of information, 3.43.2.3 Why does LTbigf warn that lsof doesn't return file offsets? On some dialects (e.g., Linux) lsof can't report file offsets, because the data access method underlying lsof doesn't provide them. If LTbigf knows that lsof can't report file offsets for the dialect, it issues this warning: LTbigf ... WARNING!!! lsof can't return file offsets for this dialect, so offset tests have been disabled. LTbigf then performs the size test and skips the offset tests. For more information see 00TEST and the "Why doesn't /proc-based lsof report file offsets (positions)?" Q&A of this file. 3.43.3 Why does the LTbasic test complain "ERROR!!! lsof this ..." and "ERROR!!! lsof that ..."? The LTbasic test program uses lsof to examine a running lsof process. It looks for the lsof current working directory, executable (if possible), and kernel memory file (if applicable). Failures to find those things result in the LTbasic error messages. More information on how LTbasic produces the error messages may be found in the LTbasic.c source file. On HP-UX 11.11 and higher, for example, if the test's current working directory is on a loopback (LOFS) file system, LTbasic won't be able to find the current working directory of the lsof process because of a bug in the HP-UX kernel. The solution for that HP-UX problem is to install an HP-UX patch. See the answer to the "Why doesn't PSTAT-based lsof report a CWD that is on a loopback (LOFS) file system?" question for more information on the patch. 3.43.4 NFS test issues 3.43.4.1 Why does the LTnfs test complain "couldn't find NFS file ..."? The LTnfs test must work with an NFS test file. After it opens the file it asks lsof to find it on an NFS file system. If the file isn't on an NFS file system, lsof won't find it, and the NFS test script complains and fails. The work-around is to use -p option to supply a path to a regular NFS file (not a directory) that is on an NFS file system that LTnfs can read. Presuming /share/bin/file is such a file and can be opened for reading by the LTnfs test, this sample shell command could be used to run the LTnfs test successfully: $ ./LTnfs -p /share/bin/file (If the NFS file system is enabled for large files, the NFS test will produce the error message described in the following Q&A.) 3.43.5 LTnlink test issues 3.43.5.1 Why does the LTnlink test complain that its test file is on an NFS file system? The LTnlink test may complain: LTnlink ... WARNING!!! test file is NFS mounted. and then issue an explanation and a hint about using the -p option. The LTnlist test does this because of the way NFS file links are managed when an NFS file is unlinked and the unlinking process still has the file open. Unlike with files on a local file system, when an NFS file that is still open is unlinked, its link count is not reduced. The file name is changed to a name of the form .nfsxxxx and the link count is left unchanged until the process holding the file open closes it. That's done by NFS so it can keep proper track of the file on NFS clients and servers. Since the link count isn't reduced when the LTnlink test program closes the NFS test file it still has open, lsof won't find it for LTnlink with a link count of zero. Consequently, LTnlink disables that test section and issues its warning. The warning suggests that the unlink test section can be run by giving LTnlink a path to a test file with the -p option. That path must name a file LTnlink can write and unlink. Presuming /scratch23/abe/nlinkfile is on a local file system and the LTnlink test can write to it and unlink it, this sample shell command can be used to run the complete LTnlink test successfully: $ LTnlink -p /scratch23/abe/nlinkfile 3.43.5.2 Why does LTnlink delay and report "waiting for link count update: ..."? On some UNIX dialects and file system combinations the updating of link count after a file has been unlinked can be delayed. Consequently, lsof won't be able to report the updated link count to LTnlink for a while. When lsof doesn't report the proper link count to LTnlink, it sleeps and repeats the lsof call, using the "waiting for link count update: ..." message as a signal that it is waiting for the expected lsof response. The wait cycle duration is limited to approximately one minute. 3.43.6 LTdnlc test issues 3.43.6.1 Why won't the LTdnlc test run? Lsof is unable to access the DNLC cache on AIX, because the kernel symbols for the DNLC aren't exported. Contact IBM to learn why that decision was made. The LTdnlc test won't work on Apple Darwin because lsof can't obtain reliable DNLC information. The LTdnlc test may fail on other dialects. Failure causes include: a busy system with a DNLC that is changing rapidly; path name components too large for the DNLC; a file system -- e.g., NFS, /tmp, loopback -- which doesn't fully participate in the DNLC; or DNLC limitations (Many DNLC implementations will only store path name components if they are 31 characters or less.) If you suspect the file system doesn't fully participate in kernel DNLC processing, as a work-around rebuild and test lsof on one that does. 3.43.6.2 What does the LTdnlc test mean by "... found: 100.00%"? Even when it succeeds the LTdnlc test will report: LTdnlc ... /export/home/abe/src/lsof4/tests found: 100.00% This message means that the LTdnlc test asked lsof to find the file at the indicated path five times and lsof found the full path name in the indicated percentage of calls. The LTdnlc test considers it a failure if the percentage falls below 50.0% 3.43.6.3 Why does the DNLC test fail? The DNLC test may fail when some component of the lsof tests/ sub-directory can't be cached by the kernel DNLC. Some kernels have a limit on the length of individual components (typically) 32. 3.43.7 Why hasn't the test suite been qualified for 64 bit HP-UX 11 when lsof is compiled with gcc? When I attempted to qualify lsof for HP-UX 11, compiled with gcc 3.0, the LTsock test failed. I traced the failure to a gcc compilation error. Because LTsock is an important test, I didn't feel that the test suite was qualified if it failed. LTsock compiles and runs correctly on 64 bit HP-UX 11 when compiled with HP's ANSI-C. 3.43.8 LTszoff test issues 3.43.8.1 Why does LTszoff warn that lsof doesn't return file offsets? On some dialects (e.g., Linux) lsof can't report file offsets, because the data access method underlying lsof doesn't provide them. If LTszoff knows that lsof can't report file offsets for the dialect, it issues this warning: LTszoff ... WARNING!!! lsof can't return file offsets for this dialect, so offset tests have been disabled. LTszoff then performs the size test and skips the offset tests. For more information see 00TEST and the "Why doesn't /proc-based lsof report file offsets (posi